3M™ Trizact™ PSA Film Disc Roll 268XA, A20, Config (Case of 1) SKU 7100065215
The Difference Is in the Construction
One of the characteristics that makes 3M™ Trizact™ PSA Film Disc roll 268XA a standout among our other 268XA products is that it has a pressure-sensitive adhesive backing. Equipped with this attachment, attaching 268XA to backup pads and hand blocks becomes as easy as adhering a sticker. By applying a little pressure, operators have an abrasive that’s ready to use, enhancing overall productivity and throughput.
3M™ Trizact™ PSA Film Disc roll 268XA also has a polyester backing, which makes it water resistant. As 268XA is commonly used for applications like wet sanding, it’s helpful to have an abrasive that can be run wet or dry. Moreover, using a lubricant like water can help wash away excess debris, preventing it from discoloring the substrate. While it may be run damp, one of the benefits of the disc is that it requires little water for effective results.
3M Science, Applied with 3M Microreplication Technology
3M™ Trizact™ PSA Film Disc roll 268XA uses proprietary 3M microreplication technology, encapsulating aluminum oxide mineral inside tiny pyramids. These pyramids are evenly distributed over a polyester backing. While conventionally coated abrasives have erratically spaced mineral, Trizact™ abrasives focus on uniformity. As pyramids wear, fresh, sharp mineral is exposed to produce a consistent cut and a predictable, fine finish.
Great Versatility
3M™ Trizact™ PSA Film Disc roll 268XA is available in a range of grades so operators can choose the right grade for their unique application; the lower the A-grade, the finer the grade. So, operators should select a smaller grade, like A5, for a fine finish and a larger grade, like A35, for a coarser finish. Discs are color-coded by grade, to reduce the risk of mistakenly selecting the wrong grade in a sequence.
Regardless of the grade selected, operators can rely on great performance with 3M™ Trizact™ products. Operators turn to 3M™ Trizact™ PSA Film Disc roll 268XA to bring workpieces one step closer to a matte, semi-gloss or high gloss finish.
About the PSA Attachment
This 3M™ Trizact™ PSA Film Disc roll 268XA has a pressure-sensitive adhesive (PSA) to make for easy abrasive to tool attachment and increased efficiency. The PSA backing works much like a sticker, whereby operators can stick the disc to the tool by applying light pressure.
- Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
- IndustryIB
- Marketplace Formal Name3M™ Trizact™ PSA Film Disc Roll 268XA, A20, Config (Case of 1) SKU 7100065215
- Lead Time10
- Manufacturer3M
- SAP7100065215
- 3M ID60000321467
- Product Formal Name3M™ Trizact™ PSA Film Disc Roll 268XA, A20, Config (Case of 1) SKU 7100065215
- BrandTrizact
- Case UnitCase of 1
- Unit of MeasureRoll
- Product ID268XA
- Estimated Lead Time10
- Grit/Micron20 Micron
- SizeConfigurable
- DiameterConfigurable
- ColorPink
- Inventory Status CodeConfigurable
- Data Sheethttps://multimedia.3m.com/mws/media/49645J/3m-tm-trizact-tm-film-for-finishing-solid-surfaces.jpg
- Country of OriginUSA
- Return PolicyNo Return
- WidthConfigurable
- LengthConfigurable
- Bullets
- Bullet 1- Features 3M microreplication technology for a consistent finish
- Water-resistant polyester backing allows product to be run wet
- Color-coded by grade to help reduce the risk for error during multi-step sequences
- Great for polishing and finishing on a variety of substrates, from glass to acrylic
- PSA attachment makes connection to hand or power tool swift and efficient
- Transportation
- ECCN NumberEAR99
- UNSPSC Code31191500
- United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
- United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
- NMFC Item001100
- NMFC Class055.0
- NMFC Sub00
- Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
- International Air Transport AssociationNOT REGULATED
- International Maritime OrganizationNOT REGULATED
- Flashpoint TransportNo Flash Point
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.