3M™ Trizact™ PSA Film Disc 268XA, A35, Config

Equipped with a waterproof polyester backing and proprietary 3M microreplication technology, our 3M™ Trizact™ PSA Film Disc 268XA is specially designed for polishing and finishing applications.
Estimated Lead Time is 10 working days.
Request price
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      3 lbs
    • SKU
      7100109531
    • UPC/ISBN
      00051125713955
  • Industry
    IB
  • Lead Time
    10
  • Manufacturer
    3M
  • SAP
    7100109531
  • 3M ID
    60000312227
  • Product Formal Name
    3M™ Trizact™ PSA Film Disc 268XA, A35, Config
  • Brand
    Trizact
  • Case Unit
    Case of 1
  • Unit of Measure
    Each
  • Product ID
    268XA
  • Estimated Lead Time
    10
  • Grit/Micron
    35 Micron
  • Size
    Configurable
  • Diameter
    Configurable
  • Color
    Green
  • Inventory Status Code
    Configurable
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xl8mUoxt1Nv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Width
    Configurable
  • Length
    Configurable
  • Bullets
    • Bullet 1
      - Color-coded by grade to help identify steps during multi-step sequences
      - Features 3M microreplicated technology for a fast, sustained cut and consistent finish
      - Pressure-sensitive adhesive (PSA) provides swift and easy disc to tool attachment
      - Water-resistant polyester backing means disc may be run wet or dry
      - Great for polishing and finishing on a variety of substrates, from glass to acrylic
  • Transportation
    • ECCN Number
      EAR99
    • UNSPSC Code
      31191500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      001100
    • NMFC Class
      055.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7100109531
  • UPC/ISBN
    00051125713955

The Difference Is in the ConstructionWe chose a polyester film backing for 3M™ Trizact™ PSA Film Disc 268XA, because it is water-resistant and can be run wet or dry. This disc is commonly used for damp sanding on a variety of substrates, including acrylic products, solid surface materials, and glass. Using a lubricant like water helps the disc run cool and wash away debris that could warp or discolor the substrate. Depending on the project or application, 3M™ Trizact™ PSA Film Disc 268XA typically is used during the middle of a sequence to help bring the workpiece one step closer to the matte, semi-gloss or high gloss finish desired. While it may be run damp, the disc requires little water for effective results.3M™ Trizact™ PSA Film Disc 268XA uses 3M microreplication technology to produce an engineered surface of patterned, microscopic, three-dimensional structures resembling pyramids. While conventionally coated abrasives often have erratically spaced mineral, Trizact™ abrasives focus on uniformity. As pyramids wear, fresh, sharp mineral is exposed to produce a consistent cut and a predictable, fine finish. Altogether, this means fewer scraps and discards as a consequence of inconsistent results. Ongoing sharp cutting action minimizes the need to incorporate other abrasives in the sequence, thereby reducing processing steps and enhancing productivity.PSA AttachmentThe pressure-sensitive adhesive (PSA) on the back of 3M™ Trizact™ PSA Film Disc 268XA helps facilitate easy disc to tool attachment. Attaching them to your disc pad is as simple as pressing on a sticker. The PSA disc can be peeled off of the disc pad just as easily, leaving a clean surface for your next disc. Disc rolls offer the convenience of quickly tearing off a disc and eliminate the need to remove individual disc liners. PSA discs are used in conjunction with a PSA or 3M™ Stikit™ backup pad (also called a disc pad and sold separately) that is attached to a random orbital sander.Great Versatility3M™ Trizact™ PSA Film Disc 268XA is available in a range of grades A5 to A35, so operators can choose the right grade for their unique application; the lower the A-grade, the finer the grade. So, operators should select a smaller grade, like A5, for a fine finish and a larger grade, like A35, for a coarser finish. Discs are color-coded by grade, to reduce the risk of mistakenly selecting the wrong grade in a sequence.Regardless of the grade selected, operators can rely on great performance with this 3M™ Trizact™ disc – using it as a go-to abrasive for fast cutting action and consistent finishes, part after part.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.