3M™ Trizact™ Hookit™ Film Disc 466LA, A5, Config

3M™ Trizact™ Hookit™ Film Disc 466LA uses 3M Microreplication technology; micron-graded silicon carbide is formed into tiny pyramids and evenly coated on a non-compressible polyester backing. Sharp, consistent cutting action makes this abrasive great for final finishing.
Estimated Lead Time is 10 working days.
Request price
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      3 lbs
    • SKU
      7100070209
    • UPC/ISBN
      00076308670221
  • Industry
    IB
  • Lead Time
    10
  • Manufacturer
    3M
  • SAP
    7100070209
  • 3M ID
    60000322705
  • Product Formal Name
    3M™ Trizact™ Hookit™ Film Disc 466LA, A5, Config
  • Brand
    Hookit, Trizact
  • Case Unit
    Case of 1
  • Unit of Measure
    Each
  • Product ID
    466LA
  • Estimated Lead Time
    10
  • Grit/Micron
    5 Micron
  • Size
    Configurable
  • Diameter
    Configurable
  • Color
    Gray
  • Inventory Status Code
    Configurable
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Width
    Configurable
  • Length
    Configurable
  • Bullets
    • Bullet 1
      - Proprietary 3M™ Trizact™ abrasives start sharp and stay sharp, resulting in more predictable finishes and improved, consistent results
      - Discs provide easy leveling of minor clearcoat imperfections
      - Repair minor clearcoat defects, such as dust and minor scratches
      - Ideal for the 3M™ Finesse-It™ two-step paint defect repair process for automotive finishes
      - Well suited for use on mini random orbital sanders to produce a polish-ready finish
  • Transportation
    • ECCN Number
      EAR99
    • UNSPSC Code
      31191500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      001100
    • NMFC Class
      055.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7100070209
  • UPC/ISBN
    00076308670221

Fine Sanding and Finish of Painted surfacesAvailable in three grades -- A3, A5, and A7 -- 3M™ Trizact™ Hookit™ Film Disc 466LA abrasives are color coded to reduce the risk of error when there are multiple grades in a sequence. Each disc is designed for quick access and attachment to orbital or random orbital sanders. This disc is the clear coat spot repair disc that is used by automotive manufacturers worldwide.Designed to Repair Automotive FinishesWe chose silicon carbide mineral for this abrasive, because, while it breaks down faster than aluminum oxide, it tends to produce a finer finish. It's commonly used on clear coats, paint and plastics, because it can effectively sand these surfaces without significantly gouging or damaging the workpiece.3M™ Trizact™ Hookit™ Film Disc 466LA features tiny, sharp pyramids that wear gradually during sanding, continually exposing fresh mineral to give you a consistent cut and a predictable, fine finish.Attached. Clean and Easy.The 3M™ Hookit™ hook-and-loop feature makes disc attachment, removal, and re-attachment clean and easy, and facilitates re-use of the disc for the full extent of its abrasive life. The brushed nylon loop backing attaches firmly to J-shaped hooks on the disc pad (sold separately). The Hookit™ system is designed for work spaces and applications where adhesive backed discs may become contaminated by dust, dirt, or flyingdebris.For use with 3M™ Nib Removal Sander (PN 28737) or 3M ™ Mini Random Orbital Sander (PN 20244).3M™ Science. Precision Finishing by Design.3M™ Trizact™ abrasives use 3M Microreplication technology, encapsulating mineral inside tiny pyramids. These pyramids are evenly and electrostatically distributed over the backing. While conventionally coated abrasives often have erratically spaced mineral, Trizact™ abrasives focus on uniformity. As pyramids wear, fresh, sharp mineral is exposed to produce a consistent cut and a predictable, fine finish. Altogether, this means fewer scraps and discards as a consequence of inconsistent results. Ongoing sharp cutting action minimizes the need to incorporate other abrasives in the sequence, thereby reducing processing steps and enhancing productivity.In addition to high-performance abrasives, 3M Microreplication technology is also used in the manufacture of a variety of 3M products such as overhead projector lenses, reflective traffic signs and solar optical films.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.