3M™ Trizact™ Film Sheet 268XA, A10, Unbacksized, Config

Featuring a waterproof polyester backing and 3M microreplication technology, our 3M™ Trizact™ Film Sheet 268XA is specially designed for polishing and finishing applications on a variety of substrates.
Estimated Lead Time is 10 working days.
Request price
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      3 lbs
    • SKU
      7100091367
    • UPC/ISBN
      00051125718578
  • Industry
    IB
  • Lead Time
    10
  • Manufacturer
    3M
  • SAP
    7100091367
  • 3M ID
    60000316749
  • Product Formal Name
    3M™ Trizact™ Film Sheet 268XA, A10, Unbacksized, Config
  • Brand
    Trizact
  • Case Unit
    Case of 1
  • Unit of Measure
    Sheet
  • Product ID
    268XA
  • Estimated Lead Time
    10
  • Grit/Micron
    10 Micron
  • Size
    Configurable
  • Color
    Blue
  • Inventory Status Code
    Configurable
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xl8mUoxt1Nv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Width
    Configurable
  • Length
    Configurable
  • Bullets
    • Bullet 1
      - Features 3M microreplication technology for a consistent finish
      - Water-resistant polyester backing allows product to be run wet
      - Color-coded by grade to help reduce the risk for error during multi-step sequences
      - Great for polishing and finishing on a variety of substrates, from glass to acrylic
  • Transportation
    • ECCN Number
      EAR99
    • UNSPSC Code
      31191500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      001100
    • NMFC Class
      055.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7100091367
  • UPC/ISBN
    00051125718578

The Difference Is in the Construction Our 3M™ Trizact™ Film Sheet 268XA has a polyester backing which makes it water resistant. As 268XA is commonly used for applications like wet sanding, it’s helpful to have an abrasive that can be run wet or dry. Moreover, using a lubricant like water can help wash away excess debris, preventing it from discoloring the substrate. While it may be run damp, one of the benefits of the sheet is that it requires little water for effective results.As a sheet, 3M™ Trizact™ Film Sheet 268XA can be cut and shaped to meet project dimensions; the converted form gives operators an added level of flexibility.3M Science, Applied with 3M Microreplication Technology 3M™ Trizact™ Film Sheet 268XA uses proprietary 3M microreplication technology, encapsulating aluminum oxide mineral inside tiny pyramids. These pyramids are evenly distributed over a polyester backing. While conventionally coated abrasives have erratically spaced mineral, Trizact™ abrasives focus on uniformity. As pyramids wear, fresh, sharp mineral is exposed to produce a consistent cut and a predictable, fine finish.Great Versatility 3M™ Trizact™ Film Sheet 268XA is available in a range of grades so operators can choose the right grade for their unique application; the lower the A-grade, the finer the grade. So, operators should select a smaller grade, like A5, for a fine finish and a larger grade, like A35, for a coarser finish. Sheets are color-coded by grade to reduce the risk of mistakenly selecting the wrong grade in a sequence.Regardless of the grade selected, operators can rely on great performance with 3M™ Trizact™ products. Operators turn to 3M™ Trizact™ Film Sheet 268XA to bring workpieces one step closer to a matte, semi-gloss or high gloss finish.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.