• 0
:

Clear
Clear
Clear all
3M™ Trizact™ Cloth Belt 307EA, A6 JE-weight, 2 in x 42 in, Film-lok, Full-flex (Case of 50) SKU 7...

        3M™ Trizact™ Cloth Belt 307EA, A6 JE-weight, 2 in x 42 in, Film-lok, Full-flex (Case of 50) SKU 7010532530

        SKU: 7010532530

        Controlled Breakdown, Medium Pressure
        The abrasive and resin structure for the 3M™ Trizact™ Cloth Belt 307EA is formulated to break down under medium pressure and keep fresh, sharp mineral cutting to provide consistent finishes on hard metals such as carbon and stainless steel. The belt also features a grinding aid that helps prevent heat buildup, warping and discoloration.

        The belt is constructed on a durable cloth backing that helps provide control, conformability and effective medium-pressure grinding. The resin bonded abrasive gives you greater heat resistance and helps prevent delamination.

        Smooth Running, Fine Finish
        The belt uses a Film Media Splice, a strong secure bond joining the belt ends, consisting of a thin film-joining media that minimizes "chatter marks," ensures a smooth running belt, and consistent finishing results. When compared to conventional abrasive products, proprietary Trizact™ abrasives produce a finer finish, achieve results faster, and last longer.

        Ideal for Robotic Finishing and Polishing
        Robotic metal polishing demands the most consistent, refined cut and long abrasive life. 3M™ Trizact™ abrasives can consistently deliver near-mirror finishes while also delivering the abrasive life that helps reduce changeouts and downtime in robotic cells. This helps maximize the efficiency of the cell, allowing you to produce more parts per belt.

        The 3M™ Trizact™ Advantage
        Unlike conventional abrasives, our line of 3M™ Trizact™ belts start sharp and stay sharp, resulting in more predictable finishes and improved, consistent quality. 3M™ Trizact™ belts can last up to five times longer than conventional belts and provide precise finish control such that operators can reduce grade sequences, requiring fewer process steps and fewer abrasive products.

        Three-dimensional structures uniformly distributed over the entire surface of 3M™ Trizact™ abrasives ensure consistent performance and eliminate part to part variation.

        Trizact
        Estimated Lead Time is 7 working days.
        • $420.00
         
        • Return Policy

          Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

          Learn more
          • SKU
            7010532530
          • Weight
            5 lbs
          • Barcode
            00051119338669
        • Industry
          IB
        • Marketplace Formal Name
          3M™ Trizact™ Cloth Belt 307EA, A6 JE-weight, 2 in x 42 in, Film-lok, Full-flex (Case of 50) SKU 7010532530
        • Lead Time
          7
        • Manufacturer
          3M
        • SAP
          7010532530
        • 3M ID
          CY998603070
        • UPC
          00051119338669
        • Product Formal Name
          3M™ Trizact™ Cloth Belt 307EA, A6 JE-weight, 2 in x 42 in, Film-lok, Full-flex (Case of 50) SKU 7010532530
        • Brand
          Trizact
        • Case Unit
          Case of 50
        • Unit of Measure
          Each
        • Product ID
          307EA
        • Estimated Lead Time
          7
        • Grit/Micron
          6 Micron, 5 Micron
        • Size
          2 in x 42 in
        • Color
          Gray
        • Inventory Status Code
          N
        • Country of Origin
          USA
        • Return Policy
          No Return
        • Width
          2 in
        • Length
          42 in
        • Bullets
          • Bullet 1
            Self-sharpening pyramids start sharp, stay sharp, and run cooler than conventional abrasives;Flexible backing flows over contoured surfaces for consistent finishing;Three-dimensional design enables very consistent finishes throughout the abrasive life in robotic applications;Ideal for intermediate finishing and fine polishing prior to plating or buffing;Produces finer finishes than conventional electrostatically coated abrasives
        • Transportation
          • ECCN Number
            EAR99
          • Harmonized Tariff Schedule Number
            6805100000
        3M™ Trizact™ Cloth Belt 307EA uses proprietary microreplication technology where micron-graded aluminum oxide particles are formed into tiny pyramids of abrasive mineral and then coated on a rayon backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish.

        FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

        Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

        If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.