3M™ Trizact™ Cloth Belt 237AA, A16 X-weight, 1/2 in x 30 in, Film-lok, Full-flex, 200 per case

3M™ Trizact™ Cloth Belt 237AA uses proprietary microreplication technology by 3M where micron-graded aluminum oxide particles are formed into tiny pyramids of abrasive mineral and then coated on an X weight cloth backing. As these pyramids wear, fresh, sharp mineral is continually exposed to produce a consistent cut and a predictable, fine finish.

Price: $775.98

(Case of 200 Each)

  • $775.98
  • Case of 200 - $775.98
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      5.083 lbs
    • SKU
      7010309081
    • UPC/ISBN
      00051111668580
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7010309081
  • 3M ID
    60600121556
  • UPC
    00-51111-66858-0
  • Product Formal Name
    3M™ Trizact™ Cloth Belt 237AA, A16 X-weight, 1/2 in x 30 in, Film-lok, Full-flex, 200 per case
  • Brand
    Trizact
  • Case Unit
    Case of 200
  • Unit of Measure
    Each
  • Product ID
    237AA
  • Estimated Lead Time
    2
  • Grit/Micron
    16 Micron
  • Size
    1/2 in x 30 in
  • Inventory Status Code
    S
  • Data Sheet
    https://multimedia.3m.com/mws/media/1253904O/3m-abrasives-for-hand-tools-leaflet-high-res.pdf&fn=61-5002-8415-5_highres_R1.pdf
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xMxmS5xmBPv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Width
    1/2 in
  • Length
    30 in
  • Box Length (in)
    14
  • Box Width (in)
    14
  • Box Height (in)
    4.8
  • Bullets
    • Bullet 1
      - self-sharpening pyramids start sharp, stay sharp, and run cooler than conventional abrasives
      - flexible backing for consistent Finish over contours
      - Three-dimensional design enables very consistent finishes throughout the Abrasive life in robotic applications
      - for intermediate finishing and fine polishing prior to plating or buffing
      - Ideal for intermediate finishing and fine polishing prior to plating or buffing
      - produces finer finishes than conventional electrostatically coated abrasives
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      6805100000
    • UNSPSC Code
      31191504
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      001060
    • NMFC Class
      100.0
    • NMFC Sub
      06
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7010309081
  • UPC/ISBN
    00051111668580

Built For Dimensioning and Scratch RefinementThe abrasive and resin structure for the 3M™ Trizact™ Cloth Belt 237AA is formulated to break down under medium pressure and keep fresh, sharp mineral cutting to provide consistent finishes on hard metals such as carbon and stainless steel. Our belt also features a grinding aid that helps prevent heat buildup, warping and discoloration. The belt is constructed on an X-weight, durable cloth backing that helps provide control, conformability, and effective medium-pressure grinding. The resin bonded abrasive gives you greater heat resistance and helps prevent delamination.Runs Smooth, Finishes ConsistentlyThe belt uses a Film Media Splice, a strong secure bond joining the belt ends, consisting of a thin film-joining media that minimizes "chatter marks," ensures a smooth running belt, and consistent finishing results. When compared to conventional abrasive products, proprietary Trizact™ abrasives produce a finer finish, achieve results faster, and last longer.Ideal for Robotic Finishing and PolishingRobotic metal polishing demands the most consistent, refined cut and long abrasive life. 3M™ Trizact™ abrasives can consistently deliver near-mirror finishes while also delivering the abrasive life that helps reduce changeouts and downtime in robotic cells. This helps maximize the efficiency of the cell, allowing you to produce more parts per belt.The Science of Flawless FinishesUnlike conventional abrasives, our line of 3M™ Trizact™ belts start sharp and stay sharp, resulting in more predictable finishes and improved, consistent quality. 3M™ Trizact™ belts can last up to five times longer than conventional belts and provide precise finish control such that operators can reduce grade sequences, requiring fewer process steps and fewer abrasive products. Three-dimensional structures uniformly distributed over the entire surface of 3M™ Trizact™ abrasives ensure consistent performance and eliminate part to part variation.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.

3M Polishing