
3M™ Micro-Klean™ D Series Filter Cartridge D-CCHPA, 50 ea/Case (This price is for a MOQ of 2 Cases of 50) SKU 7010691160
The performance of the Micro-Klean™ D Series Filter Cartridge is directly related to the advanced winding pattern of the yarn matrix combined with our process of separately applying a tailored media “blanket” between successive layers of yarn. This winding pattern creates much larger diamond shaped contaminant holding chambers. The separately inserted blanket encloses the chambers and maintains the consistency and integrity of filtration. These two factors combine to achieve a balance of filtration characteristics, which are hard to obtain with ordinary wound filter cartridges that use teased or brushed fibers on the yarn to produce a filtering media.
Micro-Klean D Series winding pattern also provides less restriction than the patterns common to ordinary wound cartridges. Consequently, the Micro-Klean D Series Filter Cartridge provides up to 2 ½ times more open area, enhancing the flow rate by up to 500% for the same pressure drop. Micro-Klean D Series Filter Cartridge is a blanket media cartridge offering true graded density, with more open filtration on the outside of the filter and fine, efficient filtration on the inner layer of the cartridge. Clogging of the filtration surfaces by large particles is minimized and cartridge life extended which can lower cartridge replacement costs.
Micro-Klean D Series Filter Cartridges are nominally rated from 0.5 to 350 micron and are available with various media, matrix, and core materials for compatibility within different processes. Standard materials include cotton yarn/cotton media blanket for use in applications involving water, alcohol, and other polar liquids. The cotton materials and polypropylene twine/polypropylene media we use are FDA 21 CFR listed materials for use with potable water, food, and beverage products. Cartridges can be configured with tinned steel, stainless steel, or polypropylene cores. The use of various core materials gives you an advanced range of compatibility. Micro-Klean D Series Filter Cartridges can also be configured with various end-treatments and o-ring materials to fit competitive filter housings.
- Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
- Series / Family3M Micro-Klean D Series
- New ProductNew
- IndustryHC
- Marketplace Formal Name3M™ Micro-Klean™ D Series Filter Cartridge D-CCHPA, 50 ea/Case (This price is for a MOQ of 2 Cases of 50) SKU 7010691160
- Estimated Lead Time140
- Manufacturer3M
- SAP7010691160
- 3M IDJN720010873
- UPC04548623125336
- Product Formal Name3M™ Micro-Klean™ D Series Filter Cartridge D-CCHPA, 50 ea/Case (This price is for a MOQ of 2 Cases of 50) SKU 7010691160
- BrandMicro-Klean
- Case UnitThis price is for a MOQ of 2 Cases of 50
- Unit of MeasureEach
- Product TypeFilter Cartridge
- Inventory Status CodeN
- Country of OriginJapan
- Return PolicyNo Return
- Transportation
- ECCN NumberEAR99
- Harmonized Tariff Schedule Number6805301000
- United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
- United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
- NMFC Item049160
- NMFC Class000.0
- NMFC Sub00
- Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
- International Air Transport AssociationNOT REGULATED
- International Maritime OrganizationNOT REGULATED
- Flashpoint TransportNo Flash Point
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.

