3M™ LifeASSURE™ BFS Series Filter Cartridge, BFS020A03BA, 30IN, 0.2 µm, 226/spear, Silicone o-ring, 6/CS (Case of 6) SKU 7100277533
3M™ LifeASSURE™ BFS Series Filter Cartridge
3M™ LifeASSURE™ BFS Series Filter Cartridges are made with a hydrophobic PTFE membrane. The inner and outer non-woven polypropylene layers provide upstream and downstream support which allow better flow access through the membrane pleats. A second polypropylene downstream flow distribution layer further enhances airflow. Available in 10, 20 and 30-inch sizes, these filter cartridges have a standard straight pleat and a filter rating of 0.2 µm, allowing them to be used for sterilization.
The cartridge hardware components consist of an inner and outer cage made of molded polypropylene. End cap adapters and O-ring adapters are also constructed of polypropylene and contain a 316 stainless steel ring or an embedded polyethersulfone (PES) core for structural stability. All filter cartridge components are assembled by thermal bonding.
Validated PTFE construction.3M™ LifeASSURE™ BFS Series Filter Cartridges use a hydrophobic polytetrafluoroethylene (PTFE) membrane that helps minimize moisture-related pore blockage and achieves a high air flow rate in vent applications.
Broad chemical compatibility.The polypropylene construction and PTFE media of 3M™ LifeASSURE™ BFS Series Filter Cartridges provide broad chemical compatibility for use in a wide range of industrial applications.
Engineered for quality and reliability.We manufacture 3M™ LifeASSURE™ BFS Series Filter Cartridges using all-polypropylene structural components (end caps, adapters, media support, inner core and outer cage). The 3M Purification Inc. Quality Management System is approved by an accredited registering body to the ISO 9001:2008 and ISO 13485:2003 Quality Management Systems and the cartridges are 100% forward flow integrity tested prior to shipment.
Suitable for microelectronics and food and beverage applications.**For details related to the specific use conditions or limitations for food contact applications, please contact your 3M representative for more information.
- Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
- Series / Family3M LifeASSURE BFS Series
- Micron Value0.2
- End Connection226
- Seal / O-RingSilicone
- New ProductNew
- IndustryHC
- Marketplace Formal Name3M™ LifeASSURE™ BFS Series Filter Cartridge, BFS020A03BA, 30IN, 0.2 µm, 226/spear, Silicone o-ring, 6/CS (Case of 6) SKU 7100277533
- Estimated Lead Time28
- Manufacturer3M
- SAP7100277533
- 3M ID70020354687
- UPC00638060360972
- Product Formal Name3M™ LifeASSURE™ BFS Series Filter Cartridge, BFS020A03BA, 30IN, 0.2 µm, 226/spear, Silicone o-ring, 6/CS (Case of 6) SKU 7100277533
- BrandLifeASSURE
- Case UnitCase of 6
- Unit of MeasureEach
- Product TypeFilter Cartridge
- Inventory Status CodeN
- Technical Informationhttps://multimedia.3m.com/mws/media/2197774J/3m-lifeassure-bfs-series-filters-data-sheet.jpg
- Country of OriginUSA
- Return PolicyNo Return
- Length30 in
- Transportation
- ECCN NumberEAR99
- Harmonized Tariff Schedule Number6804224000
- United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
- United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
- NMFC Item001020
- NMFC Class055.0
- NMFC Sub00
- Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
- International Air Transport AssociationNOT REGULATED
- International Maritime OrganizationNOT REGULATED
- Flashpoint TransportNo Flash Point
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.