3M™ Thermally Conductive Silicone Interface Pad 5515S-20, 400 mm x 20 m, 1/Case
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time105
-
Manufacturer3M
-
SAP7010405214
-
3M IDWX300920443
-
UPC00-51115-52781-9
-
Product Formal Name3M™ Thermally Conductive Silicone Interface Pad 5515S-20, 400 mm x 20 m, 1/Case
-
Case UnitOrder of 3 Cases of 1
-
Unit of MeasureRoll
-
Product ID5515S
-
Estimated Lead Time105
-
Size15-3/4 in x 22 yd
-
Inventory Status CodeN
-
Data Sheethttps://multimedia.3m.com/mws/media/695082O/thermal-management-solutions-for-led-assembly.pdf&fn=Thermal LED Assembly Brochure_R1.pdf
-
Technical Informationhttps://multimedia.3m.com/mws/media/704871O/3mtm-thermally-conductive-silicone-interface-pad-5515s.pdf&fn=TCSIP 5515S TDS_final_R1.pdf
-
Country of OriginSouth Korea
-
Return PolicyNo Return
-
Width15-3/4 in
-
Length22 yd
-
Box Length (in)11.1
-
Box Width (in)16
-
Box Height (in)5.5
- Bullets
-
Bullet 1- Good thermal conductivity (2.7 W/m-K)
- Hardness : Shore 90 (±10)
- Good dielectric properties
- UL 94 V-0
- High temperature resistance
- "S" version incorporates a thin polyimide film carrier supported on 1 side for good converting and handling properties
- Good converting for complicated shape
- Good flexibility with over bending
- Thin thickness: 0.2 mm/0.25 mm (±0.025 mm)
- Roll is available
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number3506915000
-
UNSPSC Code31201607
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item056970
-
NMFC Class077.5
-
NMFC Sub00
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
-
SKU7010405214
-
UPC/ISBN00051115527814
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.