3M™ Stikit™ Gold Film Disc 255L, P320, Config

3M™ Stikit™ Gold Film Disc 255L features aluminum oxide abrasive grain on a film backing for a fast cut-rate and uniform, close-tolerance finish on wood, paint prep and defect repair applications. Our flexible film backing provides a consistent finish and greater tear-resistance than a comparable paper product, making it well-suited for a high-production environment.
Estimated Lead Time is 14 working days.
Request price
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      3 lbs
    • SKU
      7100093621
    • UPC/ISBN
      00076308684747
  • Industry
    IB
  • Lead Time
    14
  • Manufacturer
    3M
  • SAP
    7100093621
  • 3M ID
    60000356919
  • Product Formal Name
    3M™ Stikit™ Gold Film Disc 255L, P320, Config
  • Brand
    Stikit
  • Case Unit
    Case of 1
  • Unit of Measure
    Each
  • Product ID
    255L
  • Estimated Lead Time
    14
  • Grit/Micron
    320
  • Size
    Configurable
  • Diameter
    Configurable
  • Color
    Gold
  • Inventory Status Code
    Configurable
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xlYteP8meMv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Width
    Configurable
  • Length
    Configurable
  • Bullets
    • Bullet 1
      - 3M™ Stikit™ adhesive backing allows for quick application and easy removal
      - Aluminum oxide abrasive offers a fast cut, long life and professional performance on many surfaces
      - Tear-resistant film backing provides a close-tolerance, consistent finish
      - Open coat construction provides a more aggressive cut
      - Load-resistant coating prevents dust and debris from clogging the surface
  • Transportation
    • ECCN Number
      EAR99
    • UNSPSC Code
      31191500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      001100
    • NMFC Class
      055.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7100093621
  • UPC/ISBN
    00076308684747

Our 3M™ Stikit™ pressure sensitive adhesive backing provides ease of attachment and a clean, residue-free removal. The open coat feature provides a more aggressive cut than a comparable closed coat abrasive of the same grade, and its load-resistant coating reduces clogging, making this a good choice for woodworking and other applications where loading hinders performance. 3M™ Stikit™ Gold Film Disc 255L comes in a range of grades for fine sanding and finishing, and is resin-bonded for reliable performance under high heat and pressure.Aluminum Oxide Abrasive Offers a Fast Cut, Long Life and Professional PerformanceThis abrasive uses aluminum oxide, which is a popular choice among industrial professionals because of its fast cut-rate and long life. Due to its fast cut-rate, hardness and strength, it is widely used in grinding applications in addition to sanding and finishing applications. Aluminum oxide is suitable for a wide variety of materials in both woodworking and metalworking, including ferrous alloys.Open Coat Construction Prevents Dust and Debris from Clogging the SurfaceCoated abrasives cut better and last longer when dust isn't clogging the cutting surface of the abrasives. Open coat construction means the abrasive grains are placed with space between them to help evacuate sanding dust and other debris to avoid clogging the cutting edge of the grains. The load-resistant coating also allows the product to continue cutting even when sanding softwoods, paints and other materials that would, otherwise, clog and hinder sanding ability. Additionally, the open coat feature provides a more aggressive cut than a comparable closed coat abrasive of the same grade. All of this adds up to increased productivity and reduced material consumption.3M™ Stikit™ Backing Allows for Quick Application and Easy RemovalThese high-quality, coated abrasive products come ready to use with a pressure sensitive adhesive coating on the backside so attaching to your disc pad is simple. And because the adhesive is pressure sensitive, the disc can be peeled off of the disc pad just as easily, leaving a clean surface for your next disc.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.