:
from
to
Clear
Clear
3M™ Stikit™ Disc Hand Pad 45188, 5 in x 1/8 in, 20 ea/Case (Case of 20) SKU 7100015524
SKU: 7100015524
Hand Sanding the Details
Meticulous, hand-finished detail often requires taxing hand sanding, so we designed 3M™ Stikit™ Disc Hand Pad to hold a 3M™ Stikit™ Disc to make hand sanding of wood, metal, and fiberglass easier. Fine-tune spots that may need a little extra care, and eliminate any last little sanding marks caused by the power sander.
The pad itself has an impact on your sanding results. For most large or perfectly flat surfaces, the desired surface finish can easily be attained using a soft pad. For jobs where crisp edges are essential, a hard pad is more effective. When sanding a fairly narrow edge, a soft pad will round over the edges very quickly. But a hard pad keeps the edge square and doesn’t conform to the edge.
Our 3M™ Stikit™ Attachment
The 3M™ Stikit™ system was designed for convenient changes between abrasive grades or applications. 3M™ Stikit™ abrasives come ready to use with a pressure sensitive adhesive coating on the backside so that attaching them to the hand pad is as simple as pressing on a sticker. Yet they remove cleanly without adhesive residue left on the hand pad. This makes for very fast change-outs, saving time, and prolongs the life of abrasives.
3M Science for Better Sanding
Our 3M™ Stikit™ Disc Hand Pads are another example of how 3M applies science to life. From their varied sizes and densities to their compatibility with our time- and money-saving Stikit™ attachment, our Stikit™ Disc Hand Pads demonstrate our commitment to adding comfort and higher efficiency to your operations and getting the job done right.
- Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
- IndustryIB
- Marketplace Formal Name3M™ Stikit™ Disc Hand Pad 45188, 5 in x 1/8 in, 20 ea/Case (Case of 20) SKU 7100015524
- Lead Time2
- Manufacturer3M
- SAP7100015524
- 3M ID60980108199
- UPC00051144451883
- Product Formal Name3M™ Stikit™ Disc Hand Pad 45188, 5 in x 1/8 in, 20 ea/Case (Case of 20) SKU 7100015524
- Brand-oldStikit
- BrandStikit
- Case UnitCase of 20
- Unit of MeasureEach
- Product ID45188
- Estimated Lead Time2
- Size5 in x 1/8 in
- Diameter5 Inch
- Diameter (Metric)127 mm
- ColorBlack
- Inventory Status CodeS
- Country of OriginUSA
- Product FormHand Pad
- IndustriesAOEM
- Sub IndustriesBuilders Hardware
- Equipment - MachinesHand Sanding
- Attachment TypeStikit
- Form TypeHand
- Return PolicyNo Return
- Width5 in
- Length1/8 in
- Box Length (in)6.3
- Box Width (in)6.3
- Box Height (in)4.6
- Bullets
- Bullet 1- Disc Hand Pad securely holds 3M™ Stikit™ Discs for hand sanding tasks
- Distributes pressure evenly across the work surface for a finer finish
- Soft and medium density pads provide excellent conformability for edgework and contours
- Available in 5 and 6-inch diameters thicknesses from 1/4 to 1-inch
- Elastic hand band on the back makes sanding by hand more convenient
- Transportation
- ECCN NumberEAR99
- Harmonized Tariff Schedule Number4016996050
- UNSPSC Code31191506
- United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
- United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
- NMFC Item001100
- NMFC Class055.0
- NMFC Sub00
- Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
- International Air Transport AssociationNOT REGULATED
- International Maritime OrganizationNOT REGULATED
- Flashpoint TransportNo Flash Point
3M™ Stikit™ Disc Hand Pad holds a 3M™ Stikit™ abrasive disc and makes the task of sanding by hand easier. This hand pad provides a comfortable grip and securely holds the disc. The pad distributes pressure evenly across the work surface to keep fingertips from creating or accentuating imperfections.
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.
