3M™ Secondary Liner 5051, Tan, 4.2 mil, Roll, Config

3M™ Secondary Liner 5051, Tan, 4.2 mil, Roll, Config

3M™ Secondary Release Liner 5051 is a 4.2 mil, 58-lb. polycoated kraft paper liner with a silicone release coating on one side. Designed for general purpose steel rule die cutting, this is a versatile release liner for a wide range of common applications and adhesives.
Estimated Lead Time is 21 working days.
Request price
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      3 lbs
    • SKU
      7100072774
  • Industry
    IB
  • Lead Time
    21
  • Manufacturer
    3M
  • SAP
    7100072774
  • 3M ID
    70000093321
  • Product Formal Name
    3M™ Secondary Liner 5051, Tan, 4.2 mil, Roll, Config
  • Case Unit
    Case of 1
  • Unit of Measure
    Roll
  • Product ID
    5051
  • Estimated Lead Time
    21
  • Size
    Configurable
  • Inventory Status Code
    Configurable
  • Technical Information
    https://multimedia.3m.com/mws/media/106417J/3m-secondary-liners.jpg
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Width
    Configurable
  • Length
    Configurable
  • Bullets
    • Bullet 1
      - 4.2 mil 58# PCK liner offers improved moisture stability, resists wrinkling and curling
      - Silicone release coating on one side
      - Suitable for general purpose steel rule die cutting
      - Great for common applications including double linering, selective die cutting and wide width lamination
  • Transportation
    • ECCN Number
      EAR99
    • UNSPSC Code
      31201500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      156600
    • NMFC Class
      070.0
    • NMFC Sub
      09
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7100072774

A Popular Silicone Release Liner for a Range of Applications and Adhesives Great for general purpose steel rule die cutting in a range of common applications including wide width lamination and secondary release, 3M™ Secondary Release Liner 5051 is a4.2 mil 58-lb. polycoated kraft liner with a silicone release coating on one side.It is suitable for use with many 3M adhesives.Recommended ApplicationsWide web laminationSteel rule die cuttingSecondary releaseAbout 3M™ Secondary Release Liners3M™ secondary liners are available in a variety of designs and materials. 3M provides secondary release liners in polycoated and densified kraft, flatstock, HDPE and clear polyester film for a full range of adhesives and converting processes.Bringing Better Ideas to the Surface through Science and InnovationIn our 3M Industrial Adhesives and Tapes Division, we apply the science of adhesion to deliver innovative solutions that improve the design and manufacturing processes of companies around the world. In the end, our technologies help customers like you deliver competitive products to the market faster and more efficiently.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.