3M™ Scotchkote™ Liquid Epoxy Coating 328, Part A, Spray Grade, 17 Liter Pail
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
Lead Time4
-
Manufacturer3M
-
SAP7100033734
-
3M ID80630003327
-
UPC06-89330-11722-2
-
Product Formal Name3M™ Scotchkote™ Liquid Epoxy Coating 328, Part A, Spray Grade, 17 Liter Pail
-
BrandScotchkote
-
Case UnitCase of 1
-
Unit of MeasureDrum
-
Part Number7100033734
-
Estimated Lead Time4
-
Inventory Status CodeN
-
Technical Informationhttps://multimedia.3m.com/mws/media/868253O/3m-scotchkote-liquid-epoxy-coating-328-data-sheet.pdf&fn=27971-EMD_80-6111-8614-1_328_Data_Sheet_R2.pdf
-
Instructions/Manualhttps://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xMY_emxmZNv70k17zHvu9lxtD7SSSSSS--
-
Country of OriginUSA
-
Return PolicyNo Return
-
Box Length (in)12
-
Box Width (in)12
-
Box Height (in)13.4
- Bullets
-
Bullet 1- Increased Abrasion Resistance, Impact Resistance, Gouge Resistance and Flexibility
- Improved adhesion to steel and FBE
- Improved Cathodic Disbondment Resistance
- Applied by plural component spray equipment, brush or roller
- High build up to 45 mils / 1150 microns in one pass
- Lower viscosity = easier to work with
- Can be applied to substrate at temperatures down to 41°F/5°C
- Volumetric Mix Ratio 3A:1B
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number3214905000
-
UNSPSC Code31201607
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item149980
-
NMFC Class055.0
-
NMFC Sub02
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint Transport>200°F/93°C
-
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.