3M™ Scotchcast™ Electrical Resin 281 Part A (36 lb - 5 Gallon Pail)
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7000058917
-
3M ID80700281043
-
UPC00-54007-08071-3
-
Product Formal Name3M™ Scotchcast™ Electrical Resin 281 Part A (36 lb - 5 Gallon Pail)
-
BrandScotchcast
-
Case UnitCase of 1
-
Unit of MeasureEach
-
Product ID281-5GAL-36LB
-
Estimated Lead Time2
-
ColorCream
-
Inventory Status CodeS
-
Instructions/Manualhttps://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xMxtZlxmS4v70k17zHvu9lxtD7SSSSSS--
-
Country of OriginUSA
-
Return PolicyNo Return
-
Box Length (in)12
-
Box Width (in)12
-
Box Height (in)13.5
- Bullets
-
Bullet 165 Shore D hardness;Has 22-minute gel time at 250 °F (121 °C);Useful for coating coils, transformers, motors, modules, electrical and electronic components;Withstands temperatures of 311 °F (155 °C);Elongates 45% longer than its original size for easy insulation or wrapping;Chemical- and moisture-resistant
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number3907300000
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT RESTRICTED, AS PER 49 CFR 171.4, MARINE POLLUTANT EXCEPTION
-
United States Department Of Transportation Vessel US DOT, 49 CFRUN3082, ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S., (EPOXY RESIN), 9, III, MARINE POLLUTANT, (EPOXY RESIN)
-
NMFC Item050230
-
NMFC Class070.0
-
NMFC Sub00
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationUN3082, ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S., (EPOXY RESIN), 9, III
-
International Maritime OrganizationUN3082, ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S., (EPOXY RESIN), 9, III, MARINE POLLUTANT, (EPOXY RESIN)
-
Flashpoint TransportNo Flash Point
-
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.