:
from
to
Clear
Clear
3M™ Scotch-Weld™ Structural Plastic Adhesive DP8005, Off-White, 490 mL Duo-Pak, 6/case (Case of 6) SKU 7100090196
SKU: 7100090196
When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.
Creates a Strong Bond on Low Surface Energy Plastics
Structural bonds can be achieved without special surface treatments such as chemical etching, plasma, flame, or corona treatment or priming. Simply wipe the surfaces with isopropanol to remove mold release agents, dust dirt, etc. 3M™ Scotch-Weld™ Structural Plastic Adhesive DP8005 bonds metals, ceramics, and wood and most other plastics. We also formulate this adhesive with 8 mil spacer beads for bond line spacing.
Recommended Applications
- Joining plastics to metals, such as in the manufacture or repair of appliances
- Bonding low surface energy plastics without priming
- Impact resistance composite bonding
- Manufacture or repair of various sporting goods equipment
- Low surface energy plastics such as polypropylene, polyethylene and thermoplastic elastomers (TPEs)
Medium Viscosity Allows Controlled Dispensing
Our 3M™ Scotch-Weld™ Structural Plastic Adhesive DP8005 starts with medium viscosity for controlled dispensing and spreads to sufficiently wet out the surface. The mix ratio is 10:1 and provides a 3 minute work life. The adhesive reaches handling strength in approximately 3 hour and is fully cured in 24 hours (at 72° F/22° C).
Easy Adhesion with Acrylic
Acrylic adhesives are two-part adhesives that provide excellent bond strength and durability. Often referred to as epoxy adhesives or epoxy glue, acrylics actually belong to a separate chemical family with their own unique characteristics. This very unique adhesive bonds LSE plastics without priming or other surface treatments.
- Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
- IndustryIB
- Marketplace Formal Name3M™ Scotch-Weld™ Structural Plastic Adhesive DP8005, Off-White, 490 mL Duo-Pak, 6/case (Case of 6) SKU 7100090196
- Lead Time2
- Manufacturer3M
- SAP7100090196
- 3M ID62278636303
- UPC00051128992975
- Product Formal Name3M™ Scotch-Weld™ Structural Plastic Adhesive DP8005, Off-White, 490 mL Duo-Pak, 6/case (Case of 6) SKU 7100090196
- Brand-oldScotch-Weld
- BrandScotch-Weld
- Case UnitCase of 6
- Unit of MeasureEach
- Product IDDP8005
- Estimated Lead Time2
- Volume490 mL
- ColorOff White
- Inventory Status CodeS
- Data Sheethttp://multimedia.3m.com/mws/media/79749O
- Technical Informationhttps://multimedia.3m.com/mws/media/79082J/joint-design-for-structural-adhesives-technical-bulletin.jpg
- Instructions/Manualhttps://cdmsweb.3m.com/ingredientcommunication/file/Media/HPyXC9n8rX8=
- Country of OriginUSA
- Product FormEach
- IndustriesAutomotive
- Adhesive TypeAcrylic
- Return PolicyNo Return
- Box Length (in)8.4
- Box Width (in)7.9
- Box Height (in)9.6
- Bullets
- Bullet 1- Creates strong bond on low surface energy plastics (LSE) such as polyolefin with minimal or no surface prep required
- Resists many chemicals, water, humidity and corrosion
- Formulated to bond multi-material assemblies such as LSE plastics, thermoplastics composites and metals
- Medium viscosity allows controlled dispensing
- 3 minute work life with 3 hours handling strength
- Strong adhesive can replace screws, rivets and welding
- Transportation
- ECCN NumberEAR99
- Harmonized Tariff Schedule Number3506105000
- UNSPSC Code31200000
- United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
- United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
- NMFC Item004620
- NMFC Class070.0
- NMFC Sub02
- Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
- International Air Transport AssociationNOT REGULATED
- International Maritime OrganizationNOT REGULATED
- Flashpoint Transport180°F/82°C
3M™ Scotch-Weld™ Structural Plastic Adhesive DP8005 is a two-part acrylic adhesive specially formulated to bond many low surface energy plastics, including many grades of polypropylene, polyethylene, and thermoplastic elastomers (TPEs) without special surface preparation.
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.
