3M™ Roloc™ Diamond Cloth Disc 674W, 120 Mesh, TR, 2 in, Die R200P (Case of 1000) SKU 7100022116
Durability and Long Life
3M™ Roloc™ Diamond Cloth Disc 674W lasts longer and delivers a faster, more consistent cut compared to flexible metal bond diamond sanding discs. It also generally provides a more consistent finish on ceramics, carbides and hard coated materials.
Run it Wet or Dry
While it can be run dry, you can achieve optimum results by using this diamond disc with a coolant. Water is desirable when grinding or polishing with diamond abrasives, as it generally extends the abrasive life. It can also be used with oil- and water-based lubricants for lower grinding temperatures.
3M™ Roloc™ System for Easy Power Tool Attachment
This disc features the 3M™ Roloc™ quick-change attachment system, allowing operators to easily swap between discs in multi-step processes. It also makes for quick power tool attachment, helping enhance productivity and throughput. To attach the disc, operators simply attach it to a Roloc™ backup pad (sold separately) and attach the backup pad to the power tool.
- Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
- IndustryIB
- Marketplace Formal Name3M™ Roloc™ Diamond Cloth Disc 674W, 120 Mesh, TR, 2 in, Die R200P (Case of 1000) SKU 7100022116
- Lead Time5
- Manufacturer3M
- SAP7100022116
- 3M ID60440295446
- UPC00051125867450
- Product Formal Name3M™ Roloc™ Diamond Cloth Disc 674W, 120 Mesh, TR, 2 in, Die R200P (Case of 1000) SKU 7100022116
- Brand-old3M
- BrandCubitron, Roloc
- Case UnitCase of 1000
- Unit of MeasureEach
- Product ID674W
- Estimated Lead Time5
- Grit/Micron120 Mesh
- Size2 in
- Diameter2 in
- Diameter (Metric)50.8 mm
- Inventory Status CodeS
- Instructions/Manualhttps://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xMx_U5x2Gov70k17zHvu9lxtD7SSSSSS--
- Country of OriginUSA
- Product FormDisc
- Backing MaterialCloth
- Mineral TypeDiamond
- Max RPM25000
- Return PolicyNo Return
- Width2 in
- Bullets
- Bullet 1- Diamond mineral for hard-to-grind materials
- Durable water-resistant cloth backing allows for the use of coolant, which generally extends abrasive life
- Resin bonding allows for wet or dry use
- 3M™ Roloc™ attachment system allows for easier disc changes
- Transportation
- ECCN NumberEAR99
- Harmonized Tariff Schedule Number6805100000
- UNSPSC Code31191500
- United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
- United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
- NMFC Item001100
- NMFC Class055.0
- NMFC Sub00
- Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
- International Air Transport AssociationNOT REGULATED
- International Maritime OrganizationNOT REGULATED
- Flashpoint TransportNo Flash Point
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.