3M™ Resin Bond Diamond Wheels and Tools, 1A1, 6X1/4X1-1/4, X=1/8 D150 663BI - MMMRBDW28474

Our 3M™ Diamond Resin Wheel 663BI is used in the production and sharpening of carbide cutting tools. This general purpose wheel is designed to give you the best balance of form retention and the free-cutting ability and designed for use with water-based lubricants.
Price: $250.86

(Case of 1 Each)

Estimated Lead Time is 40 working days.
  • $250.86
  • Case of 1 - $250.86
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      3 lbs
    • SKU
    • UPC/ISBN
  • Industry
  • Lead Time
  • Manufacturer
  • SAP
  • 3M ID
  • UPC
  • Product Formal Name
    3M™ Resin Bond Diamond Wheels and Tools, 1A1, 6X1/4X1-1/4, X
  • Case Unit
    Case of 1
  • Unit of Measure
  • Product ID
  • Estimated Lead Time
  • Inventory Status Code
  • Country of Origin
  • Return Policy
    No Return
  • Bullets
    • Bullet 1
      - diamond Abrasive for Use when grinding cemented carbide, Tungsten carbide, and ceramics
      - durable Resin bond resists deterioration from heat, extending the life of the Abrasive wheel
      - Designed to provide both Balanced form retention and free cutting performance
      - various wheel shapes and sizes Available
      - Arbor holes are Made to Customer specifications
  • Transportation
    • UNSPSC Code
    • United States Department Of Transportation Ground US DOT, 49 CFR
    • United States Department Of Transportation Vessel US DOT, 49 CFR
    • NMFC Item
    • NMFC Class
    • NMFC Sub
    • Transport Protective Service
    • International Air Transport Association
    • International Maritime Organization
    • Flashpoint Transport
      No Flash Point
  • SKU

Designed for PrecisionOur resin bond diamond wheels are designed for high performance when grinding tungsten carbide. The 3M™ Diamond Resin Wheel 663BI line is specifically designed for the production and re-sharpening of cutting tools, including end work, gashing and cutting primary and secondary relief edges. Primary relief involves removing material directly behind the cutting edge to enhance chip clearance. For secondary relief, a slight bevel is ground next to the primary relief. End work grinds a small relief angle on the tip of the tool, while gashing adds a slot along the cutting face to allow for chip flow. Each of these processes require the highest level of quality that our 3M™ Diamond Resin Wheel 663BI provides.High Quality BondingThese superabrasive wheels also use a resin bond which is specially designed to resist thermal and chemical deterioration, which can occur during high speed grinding. This R rated bond provides cut rate without sacrificing form retentionwhile grinding materials like tungsten carbide.. This bonding material is used with water based lubricants for lower grinding temperatures.The Right Wheels for the Job3M provides a broad portfolio of superabrasive wheels used for your round tool relief and clearance angle applications. They feature a variety of metal cores, including aluminum, steel, composite and copper, and can be cut with custom arbor holes to fit customer specifications. From short runs and re-sharpening to “lights-out” and long production runs, 3M has the wheel design to meet your needs.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.