• 0
:

Clear
Clear
Clear all
3M™ Resin Bond Diamond Wheels and Tools, 11V9 3.75-1.5-.125-1.25 D220 695DM RBDW41194 (Case of 1)...

        3M™ Resin Bond Diamond Wheels and Tools, 11V9 3.75-1.5-.125-1.25 D220 695DM RBDW41194 (Case of 1) SKU 7010525036

        SKU: 7010525036

        Our resin bonded diamond wheels are designed for high performance grinding on carbide. The 3M™ Diamond Wheel 695DM line is specifically designed for the production and sharpening of cutting tools, including end work, gashing and cutting primary and secondary relief edges. Primary relief involves removing material directly behind the cutting edge to enhance chip clearance. For secondary relief, a slight bevel is ground next to the primary relief. End work grinds a small relief angle on the tip of the tool, while gashing adds a slot along the cutting face to allow for chip flow. Each of these processes require the highest level of quality that our 3M™ Diamond Wheel 695PM provides.

        High Quality Bonding
        These superabrasive wheels also use a resin bonding which are specially designed to resist thermal and chemical deterioration, which can occur during high speed grinding. This U rated bond is very hard and excellent for precision work on tool metals like carbide. This also allows for faster cuts and a higher cut rate. Used in wet grinding applications with high volume flood coolant systems, this bonding material is used with oil based lubricants for lower grinding temperatures.

        The Right Wheels for the Job
        3M provides a broad portfolio of superabrasive wheels used for your round tool relief and clearance angle applications. They feature a variety of metal cores, including aluminum, steel, composite and copper, and can be cut with custom arbor holes to fit customer specifications. From short runs and re-sharpening to “lights-out” and long production runs, 3M has the wheel design to meet your needs.

        Estimated Lead Time is 40 working days.
        • $268.72
         
        • Return Policy

          Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

          Learn more
          • SKU
            7010525036
          • Weight
            3 lbs
          • Barcode
            00638060304594
        • Industry
          IB
        • Marketplace Formal Name
          3M™ Resin Bond Diamond Wheels and Tools, 11V9 3.75-1.5-.125-1.25 D220 695DM RBDW41194 (Case of 1) SKU 7010525036
        • Lead Time
          40
        • Manufacturer
          3M
        • SAP
          7010525036
        • 3M ID
          65300322198
        • UPC
          00638060304594
        • Product Formal Name
          3M™ Resin Bond Diamond Wheels and Tools, 11V9 3.75-1.5-.125-1.25 D220 695DM RBDW41194 (Case of 1) SKU 7010525036
        • Case Unit
          Case of 1
        • Unit of Measure
          Each
        • Product ID
          695DM
        • Estimated Lead Time
          40
        • Grit/Micron
          220
        • Size
          3-3/4 x 1-1/2 x 1-1/4
        • Inventory Status Code
          N
        • Country of Origin
          USA
        • Return Policy
          No Return
        • Width
          3-3/4
        • Length
          1-1/2
        • Bullets
          • Bullet 1
            - diamond Abrasive capable of cutting or shaping cemented carbide, carbons and ceramics
            - durable Resin bond resists deterioration from heat, extending the life of the Abrasive wheel
            - Designed to provide free cutting form and the fastest cut rate
            - various wheel designs are Available for gashing, primary and Secondary relief and end Work
            - Arbor holes are Made to Customer specifications
        • Transportation
          • UNSPSC Code
            31191500
          • United States Department Of Transportation Ground US DOT, 49 CFR
            NOT REGULATED
          • United States Department Of Transportation Vessel US DOT, 49 CFR
            NOT REGULATED
          • NMFC Item
            001020
          • NMFC Class
            055.0
          • NMFC Sub
            00
          • Transport Protective Service
            PROTECTIVE SERVICE NOT REQUIRED
          • International Air Transport Association
            NOT REGULATED
          • International Maritime Organization
            NOT REGULATED
          • Flashpoint Transport
            No Flash Point
        The 3M™ Diamond Wheel 695DM is used in the production and sharpening of carbide cutting tools. This general purpose wheel is designed to give you the best form retention and the fastest cut rate when used with oil based lubricants.

        FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

        Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

        If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.