• 0
:

Clear
Clear
Clear all
3M™ Resin Bond Diamond Wheels and Tools, 14FF1, 8X.196X2.3622, X=1/4 D120 654BK, U=.157 - MMMRBDW...

        3M™ Resin Bond Diamond Wheels and Tools, 14FF1, 8X.196X2.3622, X=1/4 D120 654BK, U=.157 - MMMRBDW37296 (Case of 1) SKU 7010493107

        SKU: 7010493107

        Go-to Wheel for Cutting Tools
        One of our "go-to" wheels, the 3M™ Cut-Off Wheel 654BK strikes a balance between form retention and cut rate. It is designed to retain form under use. This cut-off wheel features a steel core. The steel core allows the use of smaller wheel flanges and it improves the lateral stability of the cut-off wheel. The resin bond is designed for use with a water-based coolant.

        This wheel conforms to the 1A1R shape and is 6 inches in diameter, 0.35 inches thick and the arbor hole is 1-1/4 inches.

        Recommended Applications
        This cut-off wheel is an outstanding choice for cutting carbide blanks to length or trimming off the damaged ends of end mills and drill bits prior to re-sharpening. Many other wheel configurations are available.

        Estimated Lead Time is 40 working days.
        • $679.14
         
        • Return Policy

          Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

          Learn more
          • SKU
            7010493107
          • Weight
            5.007 lbs
          • Barcode
            00076308250348
        • Industry
          IB
        • Marketplace Formal Name
          3M™ Resin Bond Diamond Wheels and Tools, 14FF1, 8X.196X2.3622, X=1/4 D120 654BK, U=.157 - MMMRBDW37296 (Case of 1) SKU 7010493107
        • Estimated Lead Time
          40
        • Manufacturer
          3M
        • SAP
          7010493107
        • 3M ID
          65500369130
        • UPC
          00076308250348
        • Product Formal Name
          3M™ Resin Bond Diamond Wheels and Tools, 14FF1, 8X.196X2.3622, X=1/4 D120 654BK, U=.157 - MMMRBDW37296 (Case of 1) SKU 7010493107
        • Case Unit
          Case of 1 (Price Reflects MOQ of 12 Cases)
        • Unit of Measure
          Each
        • Product ID
          654BK
        • Grit/Micron
          120
        • Inventory Status Code
          N
        • Country of Origin
          USA
        • Return Policy
          No Return
        • Transportation
          • UNSPSC Code
            31191500
          • United States Department Of Transportation Ground US DOT, 49 CFR
            NOT REGULATED
          • United States Department Of Transportation Vessel US DOT, 49 CFR
            NOT REGULATED
          • NMFC Item
            001020
          • NMFC Class
            055.0
          • NMFC Sub
            00
          • Transport Protective Service
            PROTECTIVE SERVICE NOT REQUIRED
          • International Air Transport Association
            NOT REGULATED
          • International Maritime Organization
            NOT REGULATED
          • Flashpoint Transport
            No Flash Point
        The 3M™ Cut-Off Wheel 654BK is a general purpose cut-off wheel for carbide tool manufacturing. With a highly concentrated diamond abrasive mineral, solid construction and a steel core, it is commonly used for trimming tool blanks on carbides, high speed steels and hard metals.

        FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

        Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

        If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.