3M™ PPS™ Series 2.0 Cup, 26122, Midi (13.5 fl oz, 400 mL), 2 cups per carton, 4 cartons per case
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
Lead Time2
-
Manufacturer3M
-
SAP7100135960
-
3M ID60455003669
-
UPC00-51131-26122-8
-
Product Formal Name3M™ PPS™ Series 2.0 Cup, 26122, Midi (13.5 fl oz, 400 mL), 2 cups per carton, 4 cartons per case
-
BrandPPS
-
Case UnitCase of 4
-
Unit of MeasurePack/Carton
-
Part Number26122
-
Estimated Lead Time2
-
Inventory Status CodeS
-
Country of OriginAustria
-
Return PolicyNo Return
-
Box Length (in)8.2
-
Box Width (in)8.2
-
Box Height (in)6.9
- Bullets
-
Bullet 1Hard cups designed specifically for 3M™ PPS™ Series 2.0;Mix ratios built into every hard cup – no need for separate inserts;Clear access window lets you firmly grasp the liner, making lid removal easier during tinting/refilling;‘Max Fill’ notation allows users to fit maximum amount of fluid in cup;Designed for use with quarter-turn PPS™ Series 2.0 lid locking system for faster, easier assembly;Designed for use with quarter-turn PPS™ Series 2.0 lid locking system for faster, easier assembly;One new hard cup included in every PPS™ Series 2.0 Lid & Liner Kit;Full-diameter filters are built into every lid for the highest quality filtration; aides with fluid flow.;Enlarged sealing plugs provide stable base for cups to be placed upside down when sealing and protecting coatings not in use to keep filters wet.;Existing PPS™ red dispensers can be used with 3M™ PPS™ Series 2.0;3M™ PPS™ reduces cleaning solvent consumption by up to 70% and reduces prep and clean-up time by up to 50%; compared to conventional paint cup systems
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number8424909080
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item156600
-
NMFC Class175.0
-
NMFC Sub04
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.