3M™ PPS™ Lid Dispenser: Large, Standard, or Midi, 16299, 1 per case

3M™ PPS™ Lid & Liner Dispenser is a wall-mountable unit that makes supplies such as lids and liners for the 3M™ PPS™ (Legacy) paint preparation system readily available. This storage accessory conveniently dispenses supplies one at a time, while keeping the remaining supply clean and safe from contamination.

Price: $40.91

(Case of 1 Each)

  • $40.91
  • Case of 1 - $40.91
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      3.55 lbs
    • SKU
      7100042072
    • UPC/ISBN
      00051131162990
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7100042072
  • 3M ID
    60455082770
  • UPC
    00-51131-16299-0
  • Product Formal Name
    3M™ PPS™ Lid Dispenser: Large, Standard, or Midi, 16299, 1 per case
  • Brand-old
    PPS
  • Brand
    PPS
  • Case Unit
    Case of 1
  • Unit of Measure
    Each
  • Product ID
    16299
  • Estimated Lead Time
    2
  • Color
    Red
  • Inventory Status Code
    S
  • Country of Origin
    USA
  • Applications
    Paint Application
  • Sub Applications
    Painting
  • Return Policy
    No Return
  • Box Length (in)
    11.5
  • Box Width (in)
    10.9
  • Box Height (in)
    17.3
  • Bullets
    • Bullet 1
      - Dispenses supplies for the 3M™ PPS™ (Legacy) paint preparation system
      - Offers exceptional convenience to access supplies
      - Keeps supplies clean, neat, organized and free from contamination
      - Top-loading access for reloading supplies
      - Wall mountable
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      3926909985
    • UNSPSC Code
      25000000
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      156600
    • NMFC Class
      250.0
    • NMFC Sub
      03
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7100042072
  • UPC/ISBN
    00051131162990

Designed for the 3M™ PPS™ (Legacy) Paint Preparation System3M™ PPS™ Lid & Liner Dispenser makes it easy to access supplies such as lids and liners to be used with the 3M™ PPS™ (Legacy) paint preparation system. Our dispensers will hold at least 50 units of either lids or liners. Workers can easily release just one at a time. These dispensers are wall mountable to keep supplies close at hand and countertops open. Supplies for the 3M™ PPS™ are kept clean, neat, organized and free from contamination in our dispenser. When it is time to restock supplies, the top-loading access feature offers exceptional convenience.Lid & Liner Dispenser Part Number 16299 can be used for Large, Standard, and Midi size PPS™ Liners.Lid & Liner Dispenser Part Number 16299 can be used for Large / Standard, and Midi size PPS™ Lids.Lid & Liner Dispenser Part Number 16298 can be used for Mini and Micro size PPS™ Lids and Liners.Advantages of the 3M™ PPS™SystemUnlike conventional paint cup systems, our 3M™ PPS™ eliminates the need for mixing paint in additional paint mix cups and then transferring the paint through a separate filter into a paint reservoir. This is an important advantage because waste occurs every time that a user transfers paint through mixing cups and filters. With PPS™, you place the disposable liner within the re-usable PPS™Cup. Then simply mix the paint in the PPS™disposable liner, snap the disposable lid (with the pre-welded filter) in place and attach the locking collar to complete the PPS™System. With just these few simple steps, you#39;re ready to start spraying.Your Spray Gun Functions at any Angle, Even Upside DownPPS™allows the painter to spray consistently 90 to the part, no matter how the part is positioned. This makes material transfer more consistent, limits paint overspray and lowers paint consumption. Because PPS is a closed system, you can operate in any orientation - i.e. 360 degrees.Clean Up is a Breeze and Uses Less SolventAfter spraying, the painter can use a sealing plug to seal and protect paint materials or simply discard disposable lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in the appropriate approved waste containers specified by the paint manufacturer (or local government requirements). Use a small amount of solvent for cleaning the spray gun and the PPS™adapter. With this disposable paint system, shops are often experiencing a 70% reduction in cleaning solvents, which means solvent cleaning savings and solvent disposal savings.Most guns can be cleaned with less than 3 oz. of solvent.A Versatile System that Works with Most Spray GunsSpecifically designed PPS™stainless steel metal adapters allow painters to use the PPS™ system with virtually any spray gun.Painters have also the option to use the 3M™ Accuspray™ ONE spray gun, which requires no adapters. Technicians have found that this spray gun further reduces cleaning solvent usage and cleaning and maintenance time.Reduces the Chance of Contamination Between JobsBecause the painter uses a new disposable lid (with welded-in filter) and disposable liner for each mix, there is less risk of outside contamination due to mixing, filtering, and clean up. Using a fresh lid and liner

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.

3M PPS Paint Preparation System
3M Paint Cup
3M PPS Paint Preparation System Tech Tips

Customers who bought this product also bought

Customers who viewed this product bought