3M™ Polyimide Tape 8998, Dark Amber, 19.7 in x 36 yd, 3.3 mil, 1 roll per case, Log
3M™ Polyimide Tape 8998 is a dark amber colored polyimide tape with a silicone adhesive meant to withstand heat during high-temperature masking operations. It offers excellent thermal, chemical and abrasion resistance. It seals tight on contact and peels off clean at up to 500°F/260°C.
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time122
-
Manufacturer3M
-
SAP7100059613
-
3M ID70006765971
-
UPC00-51128-98871-8
-
Product Formal Name3M™ Polyimide Tape 8998, Dark Amber, 19.7 in x 36 yd, 3.3 mil, 1 roll per case, Log
-
Case UnitOrder of 112 Cases of 1
-
Unit of MeasureRoll
-
Product ID8998
-
Estimated Lead Time122
-
Size9-5/8 in x 36 yd
-
Size - Imperial9-5/8 in x 36 yd
-
ColorAmber
-
Inventory Status CodeS
-
Data Sheethttps://multimedia.3m.com/mws/media/1024105O/3m-polyimide-tapes-8997-and-8998.pdf&fn=70-0716-1669-5_LoRes.pdf
-
Technical Informationhttps://multimedia.3m.com/mws/media/1034362J/3m-polyimide-tape-8998.jpg
-
Country of OriginChina
-
Return PolicyNo Return
-
Width9-5/8 in
-
Length36 yd
-
Box Length (in)23.8
-
Box Width (in)5.5
-
Box Height (in)5.8
- Bullets
-
Bullet 1- Dark amber colored 2.0 mil polyimide backing with 1.2 mil silicone pressure sensitive adhesive
- Ideal for high temperature applications
- Seals tight on contact, peels off clean up to 500°F/260°C
- Exceptional tensile strength to break through cured paint
- Excellent thermal, chemical and abrasion resistance
- Thin backing for sharp paint line
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number3919905060
-
UNSPSC Code31201500
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item157190
-
NMFC Class060.0
-
NMFC Sub00
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
-
SKU7100059613
-
UPC/ISBN00051128988718
Economical, Reliable, High Temperature Powder Coat MaskingWith temperatures rising in powder coat paint operations, customers require a masking tape that can take the heat. Specifically designed for higher temp powder coat paint applications, 3M™ Polyimide Tape 8998 features a 2.0 mil thick polyimide backing with a 1.2 mil silicone adhesive. It is ideal for use in high temperature applications up to 500F/260C. Its dark amber color ensures easy identification and alignment. The high dimensional and exceptional tensile strength of this polyimide tape allows it to break through cured paint without silvering or tearing.Common uses for 3M™ Polyimide Tape 8998 include masking parts for powder coating, masking edges of overlap seams, e-coating, electroplating, anodizing and as a barrier of separation for dissimilar metals. It resists shrinking, curling and edge lifting and removes with zero adhesive residue. The thin, flexible backing seals tight on contact, peels off clean and leaves sharp, clear paint edges.Recommended ApplicationMasking parts for powder coatingMasking edges of overlap seamsBarrier of separation for dissimilar metalsPolyimide Tapes for High Temp Applications3M, the leader in masking tape technology, has developed a variety of polyimide tapes to insulate, mask, protect, seal, flash break, tab, powder coat and anodize mask. These revolutionary polyimide tapes withstand heat during rigorous, high-temperature masking operations. An exceptionally thin backing resists tears, abrasion, and the effects of aging. Pick a tape that can take the heat and keep your paint lines sharp!
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.