:
from
to
Clear
Clear
3M™ Polyimide Hybrid Bond Diamond Wheels and Tools, 1V1 4-.375-.375-1.25 D320 675HL V30 (Case of 1) SKU 7010495888
SKU: 7010495888
High Performance Grinding
Our hybrid diamond wheels are designed for high performance grinding on carbide. The 3M™ Diamond Wheel 665HL line is specifically designed for the production and sharpening of cutting tools, including end work, gashing and cutting primary and secondary relief edges. Primary relief involves removing material directly behind the cutting edge to enhance chip clearance. For secondary relief, a slight bevel is ground next to the primary relief. End work grinds a small relief angle on the tip of the tool, while gashing adds a slot along the cutting face to allow for chip flow. Each of these processes require the highest level of quality that our 3M™ Diamond Wheel 665HL provides.
Hybrid Bonding System
The 3M™ Diamond Wheel 665HL line uses a hybrid bond system which offers increased thermal stability compared to the phenolic or polyimide bond systems. This allows 665HL to grind at higher cut rates and maintain form under higher temperature grinding conditions where phenolic and polyimide bond systems undergo thermal and chemical deterioration.
The Right Wheel for Every Job
3M provides a broad portfolio of superabrasive wheels used for your round tool relief and clearance angle applications. From short runs and re-sharpening to “lights-out” and long production runs, 3M has the wheel design to meet your needs.
Estimated Lead Time is 25 working days.
- Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
- IndustryIB
- Marketplace Formal Name3M™ Polyimide Hybrid Bond Diamond Wheels and Tools, 1V1 4-.375-.375-1.25 D320 675HL V30 (Case of 1) SKU 7010495888
- Estimated Lead Time25
- Manufacturer3M
- SAP7010495888
- 3M ID65500401651
- UPC00638060001738
- Product Formal Name3M™ Polyimide Hybrid Bond Diamond Wheels and Tools, 1V1 4-.375-.375-1.25 D320 675HL V30 (Case of 1) SKU 7010495888
- Case UnitCase of 1 (Price Reflects MOQ of 12 Cases)
- Unit of MeasureEach
- Product ID665HL
- Grit/Micron320
- Size4 x 3/8 x 1-1/4
- Inventory Status CodeN
- Country of OriginUSA
- Return PolicyNo Return
- Width4
- Length3/8
- Transportation
- ECCN NumberEAR99
- Harmonized Tariff Schedule Number6804210020
- UNSPSC Code31191500
- United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
- United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
- NMFC Item001020
- NMFC Class055.0
- NMFC Sub00
- Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
- International Air Transport AssociationNOT REGULATED
- International Maritime OrganizationNOT REGULATED
- Flashpoint TransportNo Flash Point
3M™ Diamond Wheel 665HL is used in the production and sharpening of carbide cutting tools. This general purpose wheel is designed to give you the best form retention and a long wheel life without sacrificing cut rate. It can be used with either oil or water based lubricants.
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.
