3M™ Polyester Film Tape 850, Red, 1 in x 72 yd, 1.9 mil, 36 Roll/Case, Scored (Case of 36) SKU 7100079275
An Aggressive and Permanent Hold
Our 3M™ Polyester Film Tape 850 is generally used for splicing and web applications. The backing is a thin, high-strength polyester which is abrasion resistant to help reduce splice failures while resisting breakdowns during rough handling and web processing. Coated with an aggressive pressure sensitive acrylic adhesive, this tape grabs on contact and holds securely. It meets low-caliper requirements to ensure it won't interfere with most machinery. The tape can withstand a wide temperature range from -60°F/-50°C to 300°F/150°C.
- Core starting
- Splicing and web defect marking
- Sealing, labeling and protecting
- Decorative edging
- Tape hinge
- Sealing and protecting against chemical intrusion
- Label protection where readability is a concern
- Meets a variety of specifications in the aerospace industry
- Core starting and splicing
- Defect flagging where reflective sensing is required/li>
- Decorative striping and edging/li>
- Meets a variety of specifications in the aerospace industry/li>
- Splicing of film, including movie film
- Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
- IndustryIB
- Marketplace Formal Name3M™ Polyester Film Tape 850, Red, 1 in x 72 yd, 1.9 mil, 36 Roll/Case, Scored (Case of 36) SKU 7100079275
- Lead Time19
- Manufacturer3M
- SAP7100079275
- 3M IDUU004022594
- UPC05054180005077
- Product Formal Name3M™ Polyester Film Tape 850, Red, 1 in x 72 yd, 1.9 mil, 36 Roll/Case, Scored (Case of 36) SKU 7100079275
- Case UnitCase of 36
- Unit of MeasureRoll
- Product ID850
- Estimated Lead Time19
- Thickness1.9 mil
- Size1 in x 72 yd
- Size - Imperial1 in x 72 yd
- ColorRed
- Inventory Status CodeN
- Data Sheethttps://multimedia.3m.com/mws/media/1380024J/specialty-six-polyester-tape-850.jpg
- Technical Informationhttps://multimedia.3m.com/mws/media/2366322J/3m-polyester-film-tape-850.jpg
- Country of OriginMexico
- Return PolicyNo Return
- Width1 in
- Length72 yd
- Box Length (in)9.3
- Box Width (in)9.3
- Box Height (in)9.5
- Bullets
- Bullet 1- Aggressive acrylic adhesive provides quick stick and excellent long-term holding in splicing applications
- Thin, high strength polyester film meets low caliper requirements which won't interfere with most machinery processes
- Polyester backing resists tearing and protects surfaces from abrasion and rough handling
- Temperature resistance enables tape to perform in high temperature operations
- Transparent and silver versions meet a variety of aerospace specifications
- Colored versions are highly visible for applications where marking or identification is required
- Transparent version is chemical and solvent resistant
- Low modulus, low Shore A Hardness
- Transportation
- ECCN NumberEAR99
- Harmonized Tariff Schedule Number3919102055
- UNSPSC Code31201500
- United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
- United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
- NMFC Item157190
- NMFC Class060.0
- NMFC Sub00
- Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
- International Air Transport AssociationNOT REGULATED
- International Maritime OrganizationNOT REGULATED
- Flashpoint TransportNo Flash Point
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.