3M™ Polycarbonate Ultra Precision Carrier 3000UP, Prototype, 8 mm x 80 m, Planetary, 13PR8 SGP
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time25
-
Manufacturer3M
-
SAP7100214232
-
3M IDXA006806856
-
UPC08887862352698
-
Product Formal Name3M™ Polycarbonate Ultra Precision Carrier 3000UP, Prototype, 8 mm x 80 m, Planetary, 13PR8 SGP
-
Case UnitCase of 4
-
Unit of MeasureRoll(s)
-
Product ID3000UP
-
Estimated Lead Time25
-
ColorBlack
-
Inventory Status CodeN
-
Country of OriginSingapore
-
Return PolicyNo Return
-
Box Length (in)13
-
Box Width (in)13
-
Box Height (in)24
- Bullets
-
Bullet 1- Same materials and physical characteristics as 3M™ Polycarbonate Carrier 3000; black, splice free, polycarbonate carrier with a typical surface resistivity at E5 ohms/sq., and precisely formed pockets to ensure component fit per ANSI/EIA guidelines
- Good impact strength and resistance for improved component protection
- Lower shrinkage percentage than such materials as polyester providing stable pocket dimension after formation
- Tight pocket dimensional tolerance at +/- 0.03 mm with a small pocket hole of 0.12 mm - 0.2 mm featuring small draft angle and flat pocket bottom to contain component securely in pocket with less risk of tilting, flipping and rotating
- Recommended for small static-sensitive components, such as packages of 1 mm x 1 mm or below
- Compatible with 3M™ Pressure Sensitive Adhesive Cover Tapes and 3M™ Heat Activated Adhesive Cover Tapes with good sealing and peeling performance
- Available in width of 8 mm in planetary or level winding format
-
-
SKU7100214232
-
UPC/ISBN08887862352698
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.