3M™ Platinum™ Select Filler, 31131, 1 gal ( 102 fl oz), 4 per case

3M™ Platinum™ Select Filler features a super creamy formula that greatly reduces pinholes, and reduces primer usage up to 30% vs. traditional lightweight body fillers. It delivers extreme adhesion to properly prepared steel, galvanized steel, aluminum, e coat, SMC, FRP and more. Filler is stain free and tack-free, ideal for nearly all base coat/clear coat and waterborne paint systems.
Price: $282.68

(Case of 4 Canister)

  • $282.68
  • Case of 4 - $282.68
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      31.1 lbs
    • SKU
      7100095934
    • UPC/ISBN
      00051131311312
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7100095934
  • 3M ID
    60455084362
  • UPC
    00-51131-31131-2
  • Product Formal Name
    3M™ Platinum™ Select Filler, 31131, 1 gal ( 102 fl oz), 4 per case
  • Brand-old
    Platinum
  • Brand
    Platinum
  • Case Unit
    Case of 4
  • Unit of Measure
    Canister
  • Estimated Lead Time
    2
  • Inventory Status Code
    S
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xm8txnYt1Mv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Consistency
    Paste
  • Return Policy
    No Return
  • Box Length (in)
    13.7
  • Box Width (in)
    13.7
  • Box Height (in)
    8.4
  • Bullets
    • Bullet 1
      - 3M’s highest-performing lightweight body filler
      - Super creamy formula reduces pinholes and micro pinholes
      - Refined surface creates less need for primer, reducing primer usage up to 30%
      - Delivers superior adhesion to galvanized steel, aluminum, e-coat, fiberglass and SMC
      - Resin-rich formula adheres to cured epoxy and urethane primers
      - Stain-free and tack-free, ideal under all basecoat/clearcoat systems
      - Available in 276 mL cartridges for use with the 3M™ Dynamic Mixing System
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      3214100090
    • UNSPSC Code
      25000000
    • United States Department Of Transportation Ground US DOT, 49 CFR
      LIMITED QUANTITY
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      UN3269, POLYESTER RESIN KIT, 3, III, LIMITED QUANTITY, +032C
    • NMFC Item
      050075
    • NMFC Class
      055.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      FORBIDDEN PACKAGE SIZE EXCEEDS IATA QUANTITY LIMITATIONS
    • International Maritime Organization
      UN3269, POLYESTER RESIN KIT, 3, III, LIMITED QUANTITY, +032C
    • Flashpoint Transport
      90°F/32°C
  • SKU
    7100095934
  • UPC/ISBN
    00051131311312

A Premium Body Filler for Virtually No PinholesDeveloped specifically to save time and money in collision repair operations, our 3M™ Platinum™ Select Filler is our highest-performing lightweight body filler for repairing small dents, dings, gouges and other cosmetic imperfections. If features a super creamy formula that mixes and spreads easily and creates an exceptionally fine surface with virtually no pinholes. In fact, the filler reduces greatly pinholes and micro pinholes, eliminating the need for extra primer and reducing primer usage up to 30% vs. traditional lightweight body fillers.Adheres to a Wide Range of Automotive Surfaces3M™ Platinum™ Select Filler includes adhesion promoters for extreme adhesion to the latest properly prepared substrates in automotive collision repair, including galvanized steel, aluminum, e-coat, fiberglass, sheet molding compound (SMC) and fiber reinforced polymer (FRP). Its advanced formula includes resins which allow it to adhere to cured epoxies, urethanes and 2K primers, eliminating the need to sand to bare metal. Along with the corrosion protectant included in the formula, this greatly reduces the chance of corrosion. The filler is stain-free and tack-free, ideal for use under any base coat/clear coat system including waterborne paint.3M™ Platinum™ Select Filler is available in 276 mL cartridges for use with the 3M™ Dynamic Mixing System.About the 3M™ Dynamic Mixing SystemWith the Dynamic Mixing System (DMS), 3M has created a method for mixing adhesives, sealers and fillers that saves time and helps ensure the proper mixing of two-part formulas every time. The system includes pre-loaded DMS cartridges and a series of DMS mixing nozzles, and works with a standard pneumatic applicator. Instead of premeasuring and premixing two-part products, technicians dispense the perfect amount of material, directly to the job, at the touch of a trigger. This eliminates the messy mixing process, reduces material waste and cleanup time, and helps ensure the quality and performance of finished work.3M™ Platinum™ Filler in 276 mL cartridges is ready to use with a red 3M™ DMS Mixing Nozzle, PN 05847. 3M recommends dispensing the adhesive with the pneumatic 3M™ Dynamic Mixing Gun, PN 05846.Better Science for Better Adhesion from 3MVery simply, 3M™ Platinum™ Select Filler is the right product at the right time in collision repair operations. With its super creamy, smooth formula, excellent adhesion to a variety of substrates and its ability to virtually eliminate time-consuming pinholes makes it a great example of what 3M does best: Science. Applied to Life™.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.

3M DMS Dynamic Mixing System Set Up

Customers who viewed this product bought