3M™ Perfect-It™ Ultrafine Polishing Pad, 05708, 8 in, 6 per case

Our 3M™ Perfect-It™ Ultrafine Polishing Pad helps to eliminate swirl marks on painted surfaces, even on difficult dark colored cars. Featuring a unique waffle face design that holds liquid polish, this pad applies polish evenly without releasing excess polish that may cause ripples in the finish.
Price: $227.72

(Case of 6 Each)

  • $227.72
  • Case of 6 - $227.72
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      2.9 lbs
    • SKU
      7100145281
    • UPC/ISBN
      00051131057081
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7100145281
  • 3M ID
    UU009080548
  • UPC
    00-51131-05708-1
  • Product Formal Name
    3M™ Perfect-It™ Ultrafine Polishing Pad, 05708, 8 in, 6 per case
  • Brand-old
    Perfect-It
  • Brand
    Perfect-It
  • Case Unit
    Case of 6
  • Unit of Measure
    Each
  • Estimated Lead Time
    2
  • Grit/Micron
    Ultra Fine
  • Diameter
    8 Inch
  • Diameter (Metric)
    20.3 Centimeter
  • Color-old
    Blue
  • Inventory Status Code
    S
  • Country of Origin
    USA
  • Product Form
    Buffing Pad
  • Applications
    Cured Paint
  • Attachment Type
    Quick Connect
  • Return Policy
    No Return
  • Box Length (in)
    18
  • Box Width (in)
    9.1
  • Box Height (in)
    7.7
  • Bullets
    • Bullet 1
      - Provides soft, smooth surface for applying 3M™ Perfect-it™ polishes
      - Used to help eliminate swirl marks and apply high gloss finishes
      - Waffle face provides sufficient contact surface while holding polish well
      - Inset design allows the use of 3M™ Hookit™ back up pads without adding bulk
      - Available in 8 inch and 3 inch sizes
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      8467990190
    • UNSPSC Code
      25000000
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      149240
    • NMFC Class
      000.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7100145281
  • UPC/ISBN
    00051131057081

High Quality PolishingOur 3M™ Perfect-It™ Ultrafine Polishing Pad is essential for getting the very finest polish on painted surfaces. The high quality foam material softly applies an even layer of polish while the waffle face design holds polish well during use and helps to eliminate swirl marks. This pad is manufactured with our 3M™ Hookit™ attachment system for quick pad attachment and removal and to hold the pad securely in place during use. Hookit™ buffing pads firmly attach to a hook-and-loop backup disc pad (sold separately) on rotary or random orbital tools, can be removed cleanly and easily, and can be re-used again and again for the life of the pad. Finish results are dependent on the combination of coating type, polish, and tools used.Heat ResistantWe designed the 3M™ Perfect-It™ Ultrafine Polishing Pad to address the unique chemical composition of evolving paint and clear coat technologies. Foam pads are generally less aggressive and produce a finer finish than wool pads. They normally operate at higher RPMs than wool pads also, relying on a combination of cutting and heat buildup to slightly melt the surface coating and remove fine scratches, swirl marks, and surface marring. Foam pads range in abrasive levels determined by its softness and the cell size of the holes; the larger the hole, the more aggressive the pad. "Closed cell" pads are the least aggressive type. Foam buffing pads are used in conjunction with polishes and are suitable to use with rotary and random orbital tools.Perfect-it™ Polishing System3M™ Perfect-It™ system was created to produce show-room grade finishes with deep color and rich gloss. The system uses a progressive series of abrasives, buffing pads, and proprietary polishes across four stages of repair. The stages consist of sanding, scratch refinement, compounding, machine polishing, and swirl elimination. The level of work and stages needed for paint repair depend on the severity of the paint imperfection and Perfect-It™ provides an effective solution for any level of clear coat and paint repair. 3M™ Trizact™ abrasives, along with compound and polish formulations that are unique to 3M, provide increased shop productivity while helping to deliver the best-looking vehicle possible. 3M offers almost 700 aftermarket products, covering every stage of the auto refinishing process. The commitment to continual product development ensures a stream of innovative solutions resulting in quicker job throughout, consistent quality results and reduced costs.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.

3M Buff Pads High Frequency