3M™ Nitrile High Performance Rubber and Gasket Adhesive 847, Brown, 1 Quart Can, 12/case
3M™ Nitrile High Performance Rubber and Gasket Adhesive 847 is a versatile, solvent based, high performance adhesive with comparatively low viscosity for easy application. It offers both good oil resistance and good heat resistance, and is commonly used for bonding most rubber and gasket materials.
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7000042735
-
3M ID62084765304
-
UPC00-21200-19721-5
-
Product Formal Name3M™ Nitrile High Performance Rubber and Gasket Adhesive 847, Brown, 1 Quart Can, 12/case
-
Brand-old3M
-
Case UnitCase of 12
-
Unit of MeasureCanister
-
Product ID847
-
Estimated Lead Time2
-
VolumeQuart
-
ColorBrown
-
Inventory Status CodeS
-
Data Sheethttp://multimedia.3m.com/mws/media/66984O
-
Technical Informationhttps://multimedia.3m.com/mws/media/66984J/nitrile-hp-rubber-gasket-adh-847-847h.jpg
-
Instructions/Manualhttps://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00x4xtvNxmBmv70k17zHvu9lxtD7SSSSSS--
-
Country of OriginUSA
-
Product FormBulk
-
IndustriesGeneral Industrial
-
ApplicationsLarge Surface Lamination Assembly
-
Application MethodBrush
-
Return PolicyNo Return
-
Box Length (in)14.7
-
Box Width (in)9.9
-
Box Height (in)11.9
- Bullets
-
Bullet 1- High performance adhesive intended to bond gaskets
- Adheres to nitrile rubber (BUNA), neoprene, SBR, butyl, leather, vinyl and various rubbers
- Excellent fuel, oil and water resistance
- Offers resistance to heat and moisture, performing in temperatures up to 300°F/148°C
- Optional heat cure increases bond strength
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number3506105000
-
UNSPSC Code31200000
-
United States Department Of Transportation Ground US DOT, 49 CFRLIMITED QUANTITY
-
United States Department Of Transportation Vessel US DOT, 49 CFRUN1133, ADHESIVES, 3, II, LIMITED QUANTITY, -020C
-
NMFC Item004620
-
NMFC Class060.0
-
NMFC Sub02
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationUN1133, ADHESIVES, 3, II
-
International Maritime OrganizationUN1133, ADHESIVES, 3, II, LIMITED QUANTITY, -020C
-
Flashpoint Transport-4°F/-20°C
-
-
SKU7000042735
-
UPC/ISBN00021200197215
A Versatile Rubber and Gasket Adhesive3M™ Nitrile High Performance Rubber and Gasket Adhesive 847 is one of our most versatile solvent-based adhesives for rubber and gaskets. This adhesive bonds neoprene, reclaimed, nitrile rubber (BUNA), SBR and butyl rubbers to metal, wood and numerous plastics. It provides excellent heat and water resistance, performing in temperatures up to 300°F/148°C. 3M™ Nitrile High Performance Rubber and Gasket Adhesive 847 dries quickly and offers an open bonding range of up to 15 minutes, allowing time for positioning and adjustments without slowing down work processes.Recommended ApplicationsGasket bondingBonding fuel lines, fuel tanks and panels exposed to oilAttaching rubber to various substrates (should not be applied to EPDM or TPO)Patching rubberLeather repairA High Performance Adhesive for Harsh EnvironmentsIn extreme conditions, where other adhesives are likely to fail, 3M™ Nitrile High Performance Rubber and Gasket Adhesive 847 has proven to be the go-to adhesive solution. This adhesive’s capability to form strong, flexible bonds quickly make it an optimal choice in harsh environments. Additionally, its medium viscosity allows for easy handling in brush or flow applications. As always, 3M continually strives to provide the greatest solutions for the continual refinement of projects in the workplace.Applying Your AdhesiveWhether it is being sprayed, brushed or rolled on, the application of your 3M adhesive is a straightforward process. Start by carefully applying your adhesive to your surface until you’ve formed a uniform coat. Using an overlapping pattern, the application of one coat should prove sufficient for most surfaces. Effective adhesive coverage is accomplished when 80% or more of the surface is covered. Some substrates, including porous materials, may require an additional coat. In order to apply additional adhesive, simply wait until the existing adhesive becomes dry to the touch, and then proceed with the application of the additional coat.
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.