:
from
to
Clear
Clear
3M™ Hookit™ Paper Disc 210U, P320 A-weight, 5 in x NH, Die 500X, 100/Pac, 500 ea/Case (Case of 500) SKU 7100016627
SKU: 7100016627
Long Life, Excellent Cut
Long life, excellent cut and a superior finish are the features that distinguish our 3M™ Hookit™ Paper Disc 210U. A tough aluminum oxide abrasive bonded to a flexible A-weight paper backing make it a great choice for light sanding and paint prep. Open coat construction means the abrasive grains are distributed on the backing less densely. Space between the grains helps evacuate dust and avoid clogging the cutting edge of the grains. This allows the disc to continue cutting even when sanding softwoods, paints, and other materials that would otherwise clog the disc and hinder sanding ability.
This disc is available several sizes including 3, 5 and 3 x 7/8-inch CWF in seven grades from P180 to P800 to suit a wide variety of tasks.
Secure to the Finish
3M™ Hookit™ hook-and-loop feature is a superior option in work spaces where adhesive-backed discs may become contaminated by dust, dirt, or flying debris. It keeps the disc secure when tougher applications exert torque too great for a pressure sensitive adhesive backing. And, because you can so easily attach, remove and re-attach, the life of the disc is extended.
- Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
- IndustryIB
- Marketplace Formal Name3M™ Hookit™ Paper Disc 210U, P320 A-weight, 5 in x NH, Die 500X, 100/Pac, 500 ea/Case (Case of 500) SKU 7100016627
- Lead Time2
- Manufacturer3M
- SAP7100016627
- 3M ID60650024015
- UPC00051144848959
- Product Formal Name3M™ Hookit™ Paper Disc 210U, P320 A-weight, 5 in x NH, Die 500X, 100/Pac, 500 ea/Case (Case of 500) SKU 7100016627
- Brand-oldHookit
- BrandHookit
- Case UnitCase of 500
- Unit of MeasureEach
- Inner UnitInner of 100
- Product ID210U
- Estimated Lead Time2
- Grit/Micron320
- Size5 in x NH
- Diameter5 in
- Diameter (Metric)127 mm
- ColorGold
- Inventory Status CodeS
- PositionGood
- Instructions/Manualhttps://cdmsweb.3m.com/ingredientcommunication/file/Media/9pjMnAIdxcw
- Country of OriginCanada
- Product FormDisc
- IndustriesAOEM
- ApplicationsFinishing
- Sub ApplicationsAOEM Finish Prep/Repair
- Sub IndustriesMetal Fabrication
- Backing MaterialPaper
- For Use OnCarbon Steel
- Equipment - MachinesRandom Orbital Sanders
- Attachment TypeHookit
- Mineral TypeAluminum Oxide
- Backing WeightA Weight
- Form TypeHookit™
- Max RPM12000
- Return PolicyNo Return
- Width5 in
- Box Length (in)11.3
- Box Width (in)5.9
- Box Height (in)6.3
- Bullets
- Bullet 1- good value, General purpose Disc
- tough, open coat aluminum oxide Abrasive
- Hook-and-loop Discs are easy to attach, change and reuse
- Hook-and-loop attachment resists dust, dirt and debris
- Typically used on AOEM damp sanding applications on primers and E-coat
- Transportation
- ECCN NumberEAR99
- Harmonized Tariff Schedule Number6805200000
- UNSPSC Code31191506
- United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
- United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
- NMFC Item001100
- NMFC Class055.0
- NMFC Sub00
- Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
- International Air Transport AssociationNOT REGULATED
- International Maritime OrganizationNOT REGULATED
- Flashpoint TransportNo Flash Point
The 3M™ Hookit™ Paper Disc 210U is designed for light sanding and finishing applications with a random orbital sander on metal, wood, primer, paint, fiberglass and plastics. An open coat aluminum oxide abrasive resists loading and a hook and loop attachment system make it quick and easy to attach.
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.
