3M™ Hookit™ Finishing Film Abrasive Disc 260L, 00954, 5 in, P800, 100 discs per carton, 4 cartons per case
Our 3M™ Hookit™ Film Disc 260L is ideal for auto body applications including blending, scuffing, paint prep and removing paint defects. Choose aluminum oxide mineral cutting surfaces from P600 to P1500, all on durable film backing. Several versions of the disc feature our 5- or 6-hole design to help keep dust away from the disc surface. Hookit™ attachment makes it easy to change and reuse discs.
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7000000565
-
3M ID60650034915
-
UPC00-51131-00954-7
-
Product Formal Name3M™ Hookit™ Finishing Film Abrasive Disc 260L, 00954, 5 in, P800, 100 discs per carton, 4 cartons per case
-
Brand-oldHookit
-
BrandHookit
-
Catalog Product CategoryAbrasives
-
Case UnitCase of 400
-
Unit of MeasurePack/Carton
-
Product ID260L
-
Estimated Lead Time2
-
Grit/Micron800
-
Grade RangeFine (P500-P3000 +5000)
-
Size5 in
-
Diameter5 in
-
Diameter (Metric)127 mm
-
ColorWhite
-
Inventory Status CodeS
-
Data Sheethttp://multimedia.3m.com/mws/media/1399973O
-
Instructions/Manualhttps://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xlYtGlxtSNv70k17zHvu9lxtD7SSSSSS--
-
Country of OriginUSA
-
Product FormDisc
-
ApplicationsClear Coat Blending
-
Attachment TypeHookit
-
Mineral TypeAluminum Oxide
-
Backing WeightFilm
-
Return PolicyNo Return
-
Width5 in
-
Box Length (in)11.2
-
Box Width (in)5.8
-
Box Height (in)6.2
- Bullets
-
Bullet 1Film-backed abrasive discs for high-finish auto body sanding applications
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number6805301000
-
UNSPSC Code31191500
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item001100
-
NMFC Class055.0
-
NMFC Sub00
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
-
SKU7000000565
-
UPC/ISBN00051131009547
For auto body sanding applications requiring precision or fine finishes, our 3M™ Hookit™ Film Disc 260L provides a range from P600 to P1500 grades. These film-backed abrasive discs are available in 3-, 5- or 6-inch diameter sizes. P600 and P800 grade discs are ideal for paint preparation and clear coat blending on surfaces including clear coat, fiberglass, paint, plastic and primer. They are also great for scuff sanding – faster and easier to use than traditional scuffing pads, plus there's no drying time. Our P1000, P1200 and P1500 grades are ideal for removing runs and leveling minor dust nibs as well as smoothing mismatched orange peel from topcoat finishes before repainting or buffing. This grade range is suitable for all metals and all automotive paints. Tough Abrasive, Smooth Results Our 3M™ Hookit™ Film Disc 260L combines durable film backing with fast-cutting, long-lasting aluminum oxide mineral abrasive. Aluminum oxide is a popular choice among industrial professionals because of its fast cut-rate and long life. This mineral makes a tough, durable abrasive that self-fractures to expose fresh cutting edges, whereas traditional natural abrasives dull more quickly. Due to its fast cut-rate, hardness, and strength, it is widely used in grinding applications in addition to sanding and finishing applications. Aluminum oxide is suitable for a wide variety of materials in metalworking, including ferrous alloys. Our Dust Management Features Several versions of our 3M™ Hookit™ Film Disc 260L feature our patented 5- or 6-hole pattern which helps keep dust from clogging the surface of the disc – significantly increasing cut-rate and disc life. For maximum dust extraction, use this disc with a Hookit™ Clean Sanding pad and a random orbital sander with vacuum (both sold separately). When used with a 3M™ Clean Sanding Disc Pad, the disc holes do not require alignment with the pad holes, making switching the discs fast, easy, and convenient. About Our Hookit™ Attachment System The Hookit™ hook-and-loop feature makes disc attachment, removal, and re-attachment clean and easy, and facilitates use and re-use of the disc for the extent of the abrasive life. Hookit™ disc pads have J-shaped hooks of the type most commonly used in everyday hook-and-loop applications. Hookit™ disc pads grip the brushed nylon loop backings of 3M Hookit™ discs and provide a finer finish than do adhesive backed discs. The Hookit™ system is designed for work spaces where adhesive backed discs may become contaminated by dust, dirt, or flying debris. We've Got Your Back Our film backing on abrasive discs is a combination of science and strength – smooth, flexible, durable and ideal for refined auto body finishing work. The 3M™ Hookit™ Film Disc 260L also delivers long disc life, consistently sharp cut and superior dust resistance for better auto body operations.
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.