:
from
to
Clear
Clear
3M™ Flap Wheel 741A, 6 in x 1 in x 1 in 60 X-weight, 5 ea/Case (Case of 5) SKU 7100086975
SKU: 7100086975
Mixed Ceramic Abrasive
Each flap on the 3M™ Flap Wheel 741A is covered with a ceramic abrasive mix, which was designed using a proprietary process to enhance toughness and hardness of the grain. For increased performance, this mix features aluminum oxide blended with 3M ceramic grain to create a harder, longer-lasting abrasive. Perfect for light to moderate stock removal, ceramic abrasives are engineered to cut fast and handle intense heat and stress applications. Ceramic/aluminum oxide blend surpasses aluminum oxide abrasives in cut-rate and durability and makes 3M Flap Wheel 741A an excellent choice for moderate stock removal and surface preparation.
Tough Construction
The abrasive mix is attached to a flexible backing using a resin bond. This resin bonding material is specially designed to resist thermal and chemical deterioration, which can occur during high speed sanding. This bond is very hard which allows for faster cuts and a higher cut rate. Each flap uses an X-weight polyster/cotton backing, which provides a tough, but flexible surface that bends to fit any work piece. As the wheel is used, the self-cutting flaps wear away to expose sharp, new abrasive material, assuring that surfaces are sanded consistently throughout the life of the wheel.
Flap Wheel Design
Coated Abrasive flap wheels are the ideal choice for light grinding, blending, graining and scale removal on a variety of metals. The abrasive flaps offer a long lasting supply of fresh abrasives and a load resistant design. Available in both flange mounted and spindle mounted constructions with general purpose aluminum oxide or high performing 3M ceramic aluminum oxide blend abrasive grain.
- Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
- IndustryIB
- Marketplace Formal Name3M™ Flap Wheel 741A, 6 in x 1 in x 1 in 60 X-weight, 5 ea/Case (Case of 5) SKU 7100086975
- Lead Time2
- Manufacturer3M
- SAP7100086975
- 3M ID60870004946
- UPC00051144819867
- Product Formal Name3M™ Flap Wheel 741A, 6 in x 1 in x 1 in 60 X-weight, 5 ea/Case (Case of 5) SKU 7100086975
- Brand-old3M
- Case UnitCase of 5
- Unit of MeasureEach
- Product ID741A
- Estimated Lead Time2
- Grit/Micron60
- Size6 in x 1 in x 1 in
- Diameter6 Inch
- Diameter (Metric)152.4 mm
- ColorMaroon
- Inventory Status CodeS
- Instructions/Manualhttps://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xlYt9Nx2UOv70k17zHvu9lxtD7SSSSSS--
- Country of OriginMexico
- Product FormWheel
- IndustriesMetalworking
- ApplicationsFinishing
- Sub ApplicationsBlending
- Sub IndustriesMetal Fabrication
- Backing MaterialCloth
- For Use OnStainless Steel
- Equipment - MachinesDie Grinders
- Mineral TypeCeramic
- Backing WeightX Weight
- Form TypeFlap
- Max RPM6100
- Return PolicyNo Return
- Width6 in
- Length1 in
- Box Length (in)14.1
- Box Width (in)13.9
- Box Height (in)4.8
- Bullets
- Bullet 1- Ceramic aluminum oxide blend offers excellent cut rate and life for better performance
- X-weight polyester/cotton backing withstands aggressive sanding and grinding
- Resin bonding resists thermal and chemical deterioration for extended wheel life
- Abrasive flap design Provides a soft and smooth cut on rounded or irregular surfaces
- flaps WEAR down to expose fresh Abrasive mineral, assuring a fast and consistent cut
- Transportation
- ECCN NumberEAR99
- Harmonized Tariff Schedule Number6805100000
- UNSPSC Code31191504
- United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
- United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
- NMFC Item001100
- NMFC Class055.0
- NMFC Sub00
- Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
- International Air Transport AssociationNOT REGULATED
- International Maritime OrganizationNOT REGULATED
- Flashpoint TransportNo Flash Point
The 3M™ Flap Wheel 741A was designed for light grinding, blending, deburring, and polishing on a variety of metals. Ceramic abrasive covered flaps conform to the work piece and provide a smooth clean finish.
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.
