:

Clear
Clear
3M™ Fire Barrier Composite Sheet CS-195+, 36 in x 36 in, 1/case (Case of 1) SKU 7100011415

        3M™ Fire Barrier Composite Sheet CS-195+, 36 in x 36 in, 1/case (Case of 1) SKU 7100011415

        SKU: 7100011415
        Firestopping in Nearly Any Size and Shape For larger openings and penetrations where putties and strips alone aren’t enough, our 3M™ Fire Barrier Composite Sheet CS-195+ is a one-part firestop system that installers can cut and form to exact sizes - no mixing or damming required. These sheets are easily installed using common tools and fasteners. Ideal for firestopping penetrations such as cable trays and conduit, the sheets feature intumescent material bonded to 28-gauge galvanized steel, reinforced on its facing side with hexagonal wire mesh and covered in aluminum foil. This combination of organic/inorganic materials makes these composite sheets a reliable firestop in tested and listed systems, new and retrofit. These materials also make an excellent thermal conductor, helping to dispel built-up radiant heat to preserve process and control equipment and help minimize cable derating concerns. Recommended Applications • Seal penetrations through fire-rated walls and floors • Firestop penetrations including cable trays, cable, piping and large blanks • Multiple component installations where heat build-up and derating are concerns • Shield conduit, HVAC ductwork, panels, valves and vital heat-sensitive process equipment • Fire-resistive and smoke seal for any shape opening in concrete block or slabs • Protect cable drop-outs, junction boxes and cabinets • Intermittent firestop in horizontal and vertical cable tray runs • In conjunction with 3M™ Fire Barrier Sealant or Moldable Putty MP+ Fully Tested and Approved 3M™ Fire Barrier Composite Sheet CS-195+ is firestop tested up to 4 hours in accordance with ASTM E 814 (UL 1479). The Science of Better Fire Protection from 3M Since 1925 when one of our lab assistants invented masking tape, 3M has been applying science to life -developing adhesive products and technologies that help entire industries and individual businesses worldwide. The work that began with a single 3M engineer now spans decades and generations. And all of it goes into each of our adhesives, sealants, protective coatings, devices and firestop products including 3M™ Fire Barrier Composite Sheet CS-195+ to improve performance, and to help businesses like yours operate faster, better and more efficiently.
        • $480.64
         
        • Return Policy

          Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

          • SKU
            7100011415
          • Weight
            30.2 lbs
          • Dimensions (L x W x H)
            41.1 x 36.4 x 1 in
          • Barcode
            00051115072222
        • Industry
          IB
        • Marketplace Formal Name
          3M™ Fire Barrier Composite Sheet CS-195+, 36 in x 36 in, 1/case (Case of 1) SKU 7100011415
        • Lead Time
          2
        • Manufacturer
          3M
        • SAP
          7100011415
        • 3M ID
          98040024089
        • UPC
          00051115072222
        • Product Formal Name
          3M™ Fire Barrier Composite Sheet CS-195+, 36 in x 36 in, 1/case (Case of 1) SKU 7100011415
        • Brand-old
          3M
        • Case Unit
          Case of 1
        • Unit of Measure
          Each
        • Product ID
          CS-195+
        • Estimated Lead Time
          2
        • Size
          36 in x 36 in
        • Color
          Silver
        • Inventory Status Code
          S
        • Data Sheet
          http://multimedia.3m.com/mws/media/201505O
        • Technical Information
          https://multimedia.3m.com/mws/media/1124166J/3m-fire-barrier-composite-sheet-cs-195-eta.jpg
        • Country of Origin
          USA
        • Return Policy
          No Return
        • Width
          36 in
        • Length
          36 in
        • Box Length (in)
          41.1
        • Box Width (in)
          36.4
        • Box Height (in)
          1
        • Bullets
          • Bullet 1
            - Four-component intumescent system is ideal for firestopping larger penetrations such as cable trays and conduit
            - Forms effective intermittent fire-break within horizontal and vertical cable tray runs
            - Hard char material tightly seals penetrations against flame spread, smoke and toxic gases
            - Easy to install: cut, form and install using common trade tools for nearly any size
            - Thermally conductive: allows unwanted heat build-up to escape, helping reduce derating issues
            - Re-enterable for new or retrofit installations
            - Firestop tested for up to 4 hours in accordance with ASTM E 814 (UL 1479)
        • Transportation
          • ECCN Number
            EAR99
          • Harmonized Tariff Schedule Number
            4008210000
          • UNSPSC Code
            46191604
          • United States Department Of Transportation Ground US DOT, 49 CFR
            NOT REGULATED
          • United States Department Of Transportation Vessel US DOT, 49 CFR
            NOT REGULATED
          • NMFC Item
            103300
          • NMFC Class
            060.0
          • NMFC Sub
            11
          • Transport Protective Service
            PROTECTIVE SERVICE NOT REQUIRED
          • International Air Transport Association
            NOT REGULATED
          • International Maritime Organization
            NOT REGULATED
          • Flashpoint Transport
            No Flash Point
        3M™ Fire Barrier Composite Sheet CS-195+ is a lightweight intumescent firestop that combines four components into a single system to help slow the spread of fire, smoke and noxious gases. Sheets combine 30-gauge steel, intumescent material, wire mesh and aluminum foil and are easy to handle and install with common trade tools. They are firestop tested for up to 4 hours of fire protection.

        FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

        Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

        If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.

        3M Fire Barrier Blocks, Plugs and Planks

        Footer navigation