3M™ Finesse-it™ Buffing Pad 02648, 3-1/4 in Orange Foam White Loop, 10 per inner 50 per case
We manufacture our 3M™ Finesse-it™ Buffing Pad - Orange Foam White Loop for use with our 3M™ Finesse-it™ polishes, which are specially designed to achieve satin, semi-gloss or high gloss finishes on wood, automotive, marine, and aerospace coatings.
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7000000636
-
3M ID60980107258
-
UPC00-51111-51151-0
-
Product Formal Name3M™ Finesse-it™ Buffing Pad 02648, 3-1/4 in Orange Foam White Loop, 10 per inner 50 per case
-
Brand-oldFinesse-It
-
BrandFinesse-It
-
Case UnitCase of 50
-
Unit of MeasureEach
-
Inner UnitInner of 10
-
Product ID51151
-
Estimated Lead Time2
-
Size3-1/4 in
-
Diameter3.25 Inch
-
Diameter (Metric)82.55 mm
-
ColorOrange Foam - White Loop
-
Inventory Status CodeS
-
Data Sheethttps://multimedia.3m.com/mws/media/995222O/3m-palm-buffer-28769-flyer-pdf.pdf&fn=61-5002-8382-7_LR.pdf
-
Country of OriginUSA
-
Product FormBuffing Pad
-
IndustriesAOEM
-
Equipment - MachinesRotary Sanders
-
Attachment TypeHookit
-
Form TypeFoam
-
Max RPM12000
-
Return PolicyNo Return
-
Width3-1/2in
-
Box Length (in)11.5
-
Box Width (in)9
-
Box Height (in)6.7
- Bullets
-
Bullet 1- Provides soft, smooth surface for applying 3M™ Finesse-it™ polishes
- Pads combine with buffers, random orbital tools, and variable speed polishers to produce desired final finish
- Repairs coatings without repainting
- 3M™ Hookit™ attachment system holds pad securely and provides quick pad change-out
- Available in Flat and Waffle face
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number3926909985
-
UNSPSC Code31191500
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item149240
-
NMFC Class250.0
-
NMFC Sub03
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
-
SKU7000000636
-
UPC/ISBN00051111511510
3M™ Finesse-it™ Buffing Pad - Orange Foam White Loop is ideal for final and extra fine finishing steps for automotive OEM clear coats and removing sand scratches or swirl marks from previous finishing steps. The orange foam buffing pads can also be used in the 3M™ Finesse-it™ Trizact™ Paint Repair System for AOEM paint and clear coats. Our pads are manufactured with the 3M™ Hookit™ attachment system for quick pad mounting and removal and to hold them securely in place during use. 3M™ Hookit™ buffing pads quickly and firmly attach to a hook-and-loop backup disc pad (sold separately) on rotary or random orbital tools, can be removed cleanly and easily, and can be re-used again and again for the life of the pad. Finish results are dependent on specific polish used, coating type, and the tool used.We developed our line of foam pads to address the unique chemical composition of evolving paint and clear coat technologies. Foam pads are generally less aggressive and produce a finer finish than wool pads. They normally operate at higher RPMs than wool pads, relying on a combination of cutting and heat buildup to slightly melt the surface coating and remove fine scratches, swirl marks, and surface marring. Foam pads range in abrasive levels determined by its softness and the cell size of the holes; the larger the hole, the more aggressive the pad. "Closed cell" pads are the least aggressive type. You can use our foam buffing pads in conjunction with polishes and are suitable to use with rotary and random orbital tools.Our line of 3M™ Finesse-it™ products are specially designed compounds and polishes to be used on OEM and baked refinish paints to remove sand scratches or to remove defects, sand scratches, or swirl marks on a variety of painted surfaces. 3M™ Finesse-it™ products are an integral part of our recommended buffing system for repairing surface defects to clear coats, lacquered wood, solid surfaces, gelcoat, powder coat, industrial paint, acrylic, and glass.
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.