3M™ Multi-PurposeReclosable Fasteners make an excellent alternative in addition to screws, nuts, bolts, snaps, clasps, welds, VHB tapes and glues when attaching materials in automobiles. Our fasteners engage simply by applying light pressure so that the hundreds of tiny mushroom-shaped steps interlock with one another. If you want to remove the component being installed with these fasteners, simply pull them apart. 3Mtechnology allows for multiple openings and closings without affecting the integrity of the fasteners. Our fasteners provide reliable performance in hot, cold, wet, sunny and other difficult environments.Typical Vehicular Uses for 3M™Multi-PurposeFasteners include:Installing cell phone holders, cup holders and toll pass holdersFastening headliners and ceiling panels in over-the-road truck cabs, buses, ambulances and recreational vehiclesHanging ceiling light diffusion panels in light rail cars and busesHanging equipment on ambulance wallsSecuring removable seat covers and cushions in vehiclesAttaching door and wall panels in vehiclesSuspending privacy curtains in truck cabsAttaching decorative liner to interior SUV cargo areasAttaching ceiling, wall and cushioning panels in cargo and horse trailers3M™Multi-PurposeReclosable Fasteners offer both aesthetic and functional advantages over traditional fasteners and attachment methods. Our fasteners also maintain the surface integrity with no holes to invite moisture, corrosion or dirt into the body.Time and labor saving is another benefit of using our reclosable fasteners, which require no drilling, screwing, tightening, or sewing. If components or materials require adjustment, It's easy to separate the fastener, adjust positioning and then reattach.Our versatile fasteners come with a pressure sensitive adhesive that may be applied at temperatures above 50 degrees Fahrenheit. The fasteners are not recommended for surfaces such as car mufflers that can exceed 300 degrees Fahrenheit.