:
from
to
Clear
Clear
3M™ Diamond Microfinishing PSA Film Sheet 675L, 9 Mic 5MIL, Light Green, 8-1/2 in x 11 in (Case of 3) SKU 7010510350
SKU: 7010510350
Designed with a polyester film backing and diamond mineral, the 3M™ Diamond Microfinishing PSA Film Sheet 675L delivers a range of finishes on hard materials like thermal spray coating, ceramics, carbides, chilled iron and granite.
Estimated Lead Time is 12 working days.
- Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
- IndustryIB
- Marketplace Formal Name3M™ Diamond Microfinishing PSA Film Sheet 675L, 9 Mic 5MIL, Light Green, 8-1/2 in x 11 in (Case of 3) SKU 7010510350
- Lead Time12
- Manufacturer3M
- SAP7010510350
- 3M IDCY998754964
- UPC00051119271423
- Product Formal Name3M™ Diamond Microfinishing PSA Film Sheet 675L, 9 Mic 5MIL, Light Green, 8-1/2 in x 11 in (Case of 3) SKU 7010510350
- Case UnitCase of 3
- Unit of MeasureSheet
- Product ID675L
- Estimated Lead Time12
- Grit/Micron9 Micron
- Size8.5 in x 11 in
- ColorLight Green
- Inventory Status CodeN
- Country of OriginUSA
- Return PolicyNo Return
- Width8.5 in
- Length11 in
- Bullets
- Bullet 1Micron-graded diamond mineral delivers a wide range of surface finishes and stock removal for all customer requirements;Polyester film backing allows film to be used dry or wet with coolant;An exceptional product for thermal spray finishing of contour / complex shapes;Pressure sensitive adhesive allows for easy attachment and clean removal;Color coded to reduce the risk of error and mixing up abrasive grades
Designed with a polyester film backing and diamond mineral, the 3M™ Diamond Microfinishing PSA Film Sheet 675L delivers a range of finishes on hard materials like thermal spray coating, ceramics, carbides, chilled iron and granite.
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.
