3M™ Diamond Dressing Tools, Rolls, Discs DSD, 3/8X1-3/4 GIDCO/FOULKES TRUEING TOOL - MMMF1910

Specially constructed with a proprietary alloy, our 3M™ DSD Truing Tool performs precision shaping of resin-bonded diamond and CBN wheels. The tool helps operators obtain the smoothest, most precise wheel performance possible by bringing balance and even surfaces back to the wheel after repeated use. It trues straight ODs, angles, or sides of these wheels without requiring the use of a coolant.
Price: $278.35

(Case of 1 Each)

Estimated Lead Time is 5 working days.
  • $278.35
  • Case of 1 - $278.35
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      3 lbs
    • SKU
      7010497683
    • UPC/ISBN
      00638060022849
  • Industry
    IB
  • Lead Time
    5
  • Manufacturer
    3M
  • SAP
    7010497683
  • 3M ID
    65500422764
  • UPC
    06-38060-02284-9
  • Product Formal Name
    3M™ Diamond Dressing Tools, Rolls, Discs DSD, 3/8X1-3/4 GIDCO/FOULKES TRUEING TOOL - MMMF1910
  • Case Unit
    Case of 1
  • Unit of Measure
    Each
  • Product ID
    Trueing Tool
  • Estimated Lead Time
    5
  • Size
    3/8 in x 1-3/4 in
  • Inventory Status Code
    N
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Width
    3/8 in
  • Length
    1-3/4 in
  • Bullets
    • Bullet 1
      - Made with a strong proprietary metal alloy excellent for truing superabrasive resin bond diamond and CBN wheels
      - Will effectively true straight ODs, angles, side walls, and even centerless grinding wheels
      - Must be used without coolant
      - Available in 1/4, 3/8, 5/8, and 1/2 inch diameters to suit wheels of similar thickness
      - Use with 3M™ Holding Block (sold separately) for mounting
      - Eye protection is necessary to ensure operator safety
  • Transportation
    • ECCN Number
      EAR99
    • UNSPSC Code
      31191500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      001020
    • NMFC Class
      055.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7010497683
  • UPC/ISBN
    00638060022849

Facilitates Effective Truing of Superabrasive WheelsAs operators know well, truing and dressing abrasive wheels are crucial to their performance. The 3M™ DSD Truing Tool helps operators save time and maximum wheel performance by making the truing process easier and more accurate.While dressing sticks typically rid the wheel of debris and refresh the abrasive grain to avoid glazing and maintain sharpness, our DSD Truing Tool helps operators shape and dress the wheel in one step so that it runs smoothly and consistently. When the wheel is out of balance and starts to wobble, proper shaping restores concentric balance, meaning the wheel surface is precisely concentric with the spindle. Moreover, a truing tool brings the wheel back to its original shape with even surfaces. A concentric, precisely shaped wheel eliminates wobbling or shaking at high speeds and results in smooth, precise performance and consistent finishes. Making the Most of Your Truing ToolFor optimum performance, securely position the 3M™ DSD Truing Tool with a 3M™ Holding Block (sold separately). Used together, the truing tool and compatible holding block ensure more uniform contact and pressure, allowing operators to swiftly and effectively true their abrasive wheels with consistent, precise results. We offer four sizes of truing tools for use on wheels of varying widths:1/4" tool – Use on diamond or CBN wheels with up to 1/4˝ width3/8" tool – Use on diamond or CBN wheels with up to 3/8˝ width1/2" tool – Use on diamond or CBN wheels up to 5/8˝ width5/8" tool – Use on large wheels including centerless (use on O.D. of the tool) When the tool is in use, it is necessary to engage a moderate to fast tool feed to eliminate unnecessary tool wear. Running the truing tool at too slow a speed will wear the tool without properly modifying the wheel. An active sparking interface between tool and wheel is the desired effect. Likewise, the appropriate wheel downfeed must be set for successful shaping, and is determined by the hardness and grit size of the wheel. See the tool instructions for tool positioning, recommended downfeeds, and directions for centerless wheels. Important Safety PrecautionsThe use of grinding wheels requires extra safety precautions, and this applies when using truing tools as well. We recommend that operators always wear eye protection and use good grinding practices regarding ventilation. An Important Task Truing and dressing are important maintenance processes required to keep expensive superabrasive grinding wheels cutting consistently. These applications also help you extend the lifespan of your superabrasive wheels and protect the grinding tools that run them. Recently trued and dressed grinding wheels have fresh cutting edges that grind quickly and evenly on metal surfaces, which increases throughput and improves quality. Thus, effective truing and dressing should be an integral part of any workshop that uses superabrasive wheels regularly.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.