3M™ Diamond Dressing Tools, Rolls, Discs DRESSING STICK, 3/4X3/4X4, 150 GRIT - MMMF1913

Experienced operators know dressing is integral to the cuttingperformance of a grinding wheel. That’s why we designed the 3M™ Dressing Stick — to help operators keep their grinding wheels open and free cutting.
Price: $2.54

(Case of 1 Each)

Estimated Lead Time is 40 working days.
  • $2.54
  • Case of 1 - $2.54
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      3 lbs
    • SKU
    • UPC/ISBN
  • Industry
  • Lead Time
  • Manufacturer
  • SAP
  • 3M ID
  • UPC
  • Product Formal Name
    3M™ Diamond Dressing Tools, Rolls, Discs DRESSING STICK, 3/4X3/4X4, 150 GRIT - MMMF1913
  • Case Unit
    Case of 1
  • Unit of Measure
  • Product ID
    Dressing Stick
  • Estimated Lead Time
  • Grit/Micron
  • Size
    3/4 in x 3/4 in x 4 in
  • Inventory Status Code
  • Instructions/Manual
  • Country of Origin
  • Return Policy
    No Return
  • Width
    3/4 in
  • Length
    3/4 in
  • Bullets
    • Bullet 1
      - good multi-purpose dressing tool, especially for superabrasive wheels
      - Available in aluminum oxide and silicon carbide mineral
      - Available in various grades depending on the dressing stick dimensions
      - for Use on resinoid CBN and diamond superabrasive wheels
      - Available in various dimensions, so operators can accommodate wheel size
  • Transportation
    • ECCN Number
    • Harmonized Tariff Schedule Number
    • UNSPSC Code
    • United States Department Of Transportation Ground US DOT, 49 CFR
    • United States Department Of Transportation Vessel US DOT, 49 CFR
    • NMFC Item
    • NMFC Class
    • NMFC Sub
    • Transport Protective Service
    • International Air Transport Association
    • International Maritime Organization
    • Flashpoint Transport
      No Flash Point
  • SKU

Don't Forget to Dress 3M offers a versatile line of dressing tools, each uniquely equipped to sharpen specific wheels. Ultimately, the dressing tool you select will be based on a variety of factors, including wheel type, size, mineral type and just how much buildup needs to be cleared from the wheel. 3M™ Dressing Stick is commonly used to dress Phenolic Resin, Polyimide Resin, and Hybrid bond superabrasive wheels. The dressing stick comes in two minerals: aluminum oxide and silicon carbide. While other 3M dressing tools use diamond mineral, these two synthetic minerals are uniquely suited to tackle superabrasive wheels. The aluminum oxide dressing stick is commonly used on cubic boron nitride (CBN) wheels and the silicon carbide dressing stick is typically used on diamond wheels. We create this dressing stick in a variety of sizes and mineral grades, so operators can best match the right dressing stick to their application. Help Wheels Live Longer While truing is synonymous with profiling and helps restore the wheel's original shape, dressing cleans the wheel’s surface by clearing away loaded material and removing worn and dull mineral and also exposes sharp mineral. Naturally, bond material and swarf build up on the wheel over time. Moreover, when a loaded wheel heats up, it can lead to glazing or smoothing of the wheel's textured face. These issues highlight the importance of dressing; it will help your wheel run as intended. In summary, truing and dressing are important maintenance processes required to keep expensive abrasive wheels cutting consistently. These applications help you extend the lifespan of your wheels and should be an integral part of any workshop that uses abrasive wheels regularly.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.