3M™ Diamond Cloth Belt 674W, 220 Mesh, 1 in x 30 in (Case of 1) SKU 7010533103
Longer-Lasting, Keeps on Cutting
Our 3M™ Diamond Cloth Belt 674W abrasives are designed to provide long-lasting cutting performance when used for finishing ceramics, carbides and hard coated materials.
Compared to flexible metal bond diamond abrasives, 3M Diamond Cloth Belts 674W generally last longer and deliver a faster, more consistent cut.
Use Wet for a Finer Finish and Longer Abrasive Life
While it can be run dry, achieve optimum results when you use this diamond abrasive belt with a coolant. Water is a desirable when grinding or polishing with diamond abrasives, since it efficiently cools both the work and the abrasive. Use with a coolant minimizes any risk of thermal damage.
Recommended Applications
3M™ Diamond Cloth Belt 674W is an excellent choice for finishing and dimensioning a variety of hard-to-grind materials, including tungsten carbide and chrome carbide, thermal sprays, yttria-stabilized zirconia and alumina ceramics, and carbon fiber epoxy composites.
It also easily removes coating oversprays and coatings prior to part refurbishment.
- Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
- IndustryIB
- Marketplace Formal Name3M™ Diamond Cloth Belt 674W, 220 Mesh, 1 in x 30 in (Case of 1) SKU 7010533103
- Lead Time5
- Manufacturer3M
- SAP7010533103
- 3M IDCY998608855
- UPC00638060708705
- Product Formal Name3M™ Diamond Cloth Belt 674W, 220 Mesh, 1 in x 30 in (Case of 1) SKU 7010533103
- Case UnitCase of 1
- Unit of MeasureEach
- Product ID674W
- Estimated Lead Time5
- Grit/Micron220
- Size1 in x 30 in
- ColorGreen
- Inventory Status CodeN
- Country of OriginUSA
- Return PolicyNo Return
- Width1 in
- Length30 in
- Bullets
- Bullet 1Diamond mineral provides consistent stock removal and finishes on hard-to-grind materials;Heavy-duty cloth backing supports aggressive stock removal on hard materials;Water-resistance enables wet applications for cooler grinding and generally longer abrasive life;Available in 120mesh and 220mesh for a variety of removal and finish requirements;Available in small belt sizes
- Transportation
- Harmonized Tariff Schedule Number6805100000
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.