3M™ Cubitron™ II Cloth Belt 981F, Kit, 1/2 in x 18 in, 25 per case

3M™ Cubitron™ II Cloth Belt 981F is an abrasive sanding belt for grinding, weld removal, finishing and blending on softer metals. It is constructed on a tough, Y-weight backing with fast-cutting 3M Precision-Shaped Grain. The water-resistant material and cutting aide allow for use with liquid coolants to prevent loading when used on aluminum, bronze and brass.

Price: $253.11

(Case of 25 Kit)

  • $253.11
  • Case of 25 - $253.11
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      4.931 lbs
    • SKU
      7100166522
    • UPC/ISBN
      00638060211687
  • Industry
    IB
  • Lead Time
    10
  • Manufacturer
    3M
  • SAP
    7100166522
  • 3M ID
    60440318230
  • UPC
    06-38060-21168-7
  • Product Formal Name
    3M™ Cubitron™ II Cloth Belt 981F, Kit, 1/2 in x 18 in, 25 per case
  • Brand
    Cubitron
  • Case Unit
    Case of 25
  • Unit of Measure
    Kit
  • Product ID
    981F
  • Estimated Lead Time
    10
  • Size
    1/2 in x 18 in
  • Inventory Status Code
    S
  • Technical Information
    https://multimedia.3m.com/mws/media/1532646J/3m-cubitron-ii-981f-tds.jpg
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xm8m9OY_BMv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Width
    1/2 in
  • Length
    18 in
  • Box Length (in)
    12
  • Box Width (in)
    12
  • Box Height (in)
    9.3
  • Bullets
    • Bullet 1
      - Designed specifically for grinding on soft metal substrates like aluminum, brass and bronze
      - 3M Precision-Shaped Grain cuts exceptionally fast for grinding and finishing on soft metals
      - Integrated dry lubricant reduces loading when grinding soft metals
      - Strong mineral adhesion for reduced shelling when grinding on the edge of the belt
      - Tough, Y-weight polyester cloth backing holds up to finishing and aggressive grinding
      - Water-resistant polyester material can be used with liquid coolants to reduce grinding temperatures
      - Durable resin bonding resists deterioration from heat, extending the life of the abrasive cloth
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      6805301000
    • UNSPSC Code
      31191500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      001100
    • NMFC Class
      055.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7100166522
  • UPC/ISBN
    00638060211687

Solving the Challenges of Soft Metals3M™ Cubitron™ II Cloth Belt 981F is designed to solve three common problems associated with grinding and finishing aluminum and other soft metals: abrasive loading, edge-shelling and operator fatigue.To help reduce loading when working with aluminum, bronze and brass, a dry lubricant is integrated into the abrasive and allows the abrasive grain to be relatively free from metal coating them, allowing the cutting surface of the mineral to remain effective. The waterproof backing also enables the user to rinse areas of the workpiece and the cloth during use, in case the abrasive begins to clog.To help prevent edge-shelling, our 3M™ Cubitron™ II Cloth Belt 981F features a durable, Y-weight polyester cloth backing that stands up to the stresses of working on gates, parting lines and flashing in tight spaces. Plus, unlike other cloth grinding belts, ours features a proprietary resin system to improve mineral adhesion, further reducing the chances of shelling.Worker fatigue can be a concern when grinding softer substrates. 3M™ Cubitron™ II Cloth Belt 981F grinds efficiently, and 3M Precision-Shaped Grain can allow the operator to cut with less pressure, which may help to reduce physical exertion on an operator.About 3M Precision-Shaped Grain3M Precision-Shaped Grain is the advanced technology behind our 3M™ Cubitron II™ products. Its sharp, triangular structures continually fracture into sharp points and edges that slice cleanly through the substrate, rather than gouging or plowing as traditional abrasives do. This creates a fast cut and minimizes heat build-up in the workpiece, reducing heat-related defects. Moreover, because the abrasive itself stays cooler and sharper, it lasts significantly longer than conventional abrasive belts, decreasing the number of belt changeovers to lower operational costs. Its closed coat construction features a dense spread of abrasive grains across the surface of the cloth, cutting fast and providing a consistent finish.Applications and Machine TypesGate grindingFlashing removalParting line removalDeburringFinishingBackstand grindersStroke sandingSmall bench grindersIn-line sandersFile belts

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.

3M Weld Leveling
3M Cubitron II Abrasive Belt Line Video
3M Power Tool Sanding Belts
3M Cubitron II Precision Shaped Grain