3M™ Cold Shrink Splice Kit 5552, 5/8 kV, 4/0 AWG-500 kcmil (Cu) or 4/0 AWG-400 kcmil (Al), 21 in, 1/Case

3M™ Cold Shrink Shielded Splice Kit 5550 Series are for splicing 5 kV and 8 kV shielded, solid dielectric, power cables. Meets requirements of IEEE 404. Each kit contains all the materials (except connectors and optional ground strap) required to construct three (3) single conductor splices on Tape Shield, Wire Shield or UniShield® cables. Note: The kit can also be used to splice a shielded to a non-shielded 5/8 kV cable. Note: Cable sizes shown below are for standard insulation thickness. Final determining factor is cable insulation O.D.
Price: $1202.49

(Case of 1 Kit)

  • $1202.49
  • Case of 1 - $1202.49
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      9.4 lbs
    • SKU
      7000006047
    • UPC/ISBN
      00054007090908
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7000006047
  • 3M ID
    80610735278
  • UPC
    00-54007-09090-8
  • Product Formal Name
    3M™ Cold Shrink Splice Kit 5552, 5/8 kV, 4/0 AWG-500 kcmil (Cu) or 4/0 AWG-400 kcmil (Al), 21 in, 1/Case
  • Case Unit
    Case of 1
  • Unit of Measure
    Kit
  • Estimated Lead Time
    2
  • Inventory Status Code
    S
  • Technical Information
    https://multimedia.3m.com/mws/media/41625J/cold-shrink-rubber-splicing-kits-5550-series.jpg
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xM82ZMY_e4v70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Box Length (in)
    25.6
  • Box Width (in)
    12
  • Box Height (in)
    5.9
  • Bullets
    • Bullet 1
      - Provides splicing on tape shield, wire shield and UniShield® cables
      - This kit is suitable for use on solid dielectric cables, indoor or outdoor locations and direct-burial applications
      - Insulator and jacket is made of EPDM for easy installation
      - Rated for 5/8 kV applications
      - IEEE Approved
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      8536908585
    • UNSPSC Code
      31270000
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT RESTRICTED, AS PER 49 CFR 171.4, MARINE POLLUTANT EXCEPTION
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT RESTRICTED, AS PER 49 CFR 171.4, MARINE POLLUTANT EXCEPTION
    • NMFC Item
      061205
    • NMFC Class
      110.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT RESTRICTED, AS PER SPECIAL PROVISION A197, ENVIRONMENTALLY HAZARDOUS SUBSTANCE EXCEPTION
    • International Maritime Organization
      NOT RESTRICTED, AS PER IMDG CODE 2.10.2.7, MARINE POLLUTANT EXCEPTION
    • Flashpoint Transport
      No Flash Point
  • SKU
    7000006047
  • UPC/ISBN
    00054007090908

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.