3M™ Cloth Cone 777F, 2-1/2 in x 13/16 in x 9/16 in, 80 YF-weight, 200 ea/Case (Case of 200) SKU 7100179514
Long Life. Fast Cutting. Cool Running.
One of 3M's best cloth-backed abrasives for stainless steels, aluminum and carbon steel, 3M™ Cloth Cone 777F is used with die grinders. 3M-engineered high-performance ceramic abrasive grain is blended with aluminum oxide for a combination of durability and cutting efficiency. The heavy, water-resistant polyester backing supports medium-pressure applications, a consistent cut-rate, and both wet and dry applications.
Tackle Tight Corners
This specialty abrasive is a valuable tool for reaching into corners, where larger diameter tools can't work. It is effective for flash removal, as well as polishing or removing machine tool marks and edge breaking.
Cloth cones mount onto a compatible mandrel (sold separately) that attaches to a die grinder or power drill. The center hole diameter of the cone must be equal to the diameter of the mandrel pilot inserted into the cone.
Best for Heat-Sensitive Metals
Ideally suited for heat sensitive metals like stainless steel, aluminum and nickel alloys, 3M™ Cloth Cone 777F combines all the right features to grind cooler with an efficient and faster cut.
- Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
- IndustryIB
- Marketplace Formal Name3M™ Cloth Cone 777F, 2-1/2 in x 13/16 in x 9/16 in, 80 YF-weight, 200 ea/Case (Case of 200) SKU 7100179514
- Estimated Lead Time40
- Manufacturer3M
- SAP7100179514
- 3M ID60440350837
- UPC00638060056608
- Product Formal Name3M™ Cloth Cone 777F, 2-1/2 in x 13/16 in x 9/16 in, 80 YF-weight, 200 ea/Case (Case of 200) SKU 7100179514
- Case UnitCase of 200
- Unit of MeasureEach
- Product ID777F
- Grit/Micron80
- Size2-1/2 in x 13/16 in x 9/16 in
- ColorOrange
- Inventory Status CodeN
- Country of OriginUSA
- Return PolicyNo Return
- Width2-1/2 in
- Length13/16 in
- Transportation
- ECCN NumberEAR99
- United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
- United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
- NMFC Item001100
- NMFC Class055.0
- NMFC Sub00
- Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
- International Air Transport AssociationNOT REGULATED
- International Maritime OrganizationNOT REGULATED
- Flashpoint TransportNo Flash Point
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.


