3M™ Cloth Belt 461F, P400 XF-weight, 3 in x 79 in, Film-lok, Single-flex (Case of 50) SKU 7010532281
Tough Durability for Coarse Grinding
3M™ Cloth Belt 461F is frequently used for coarse grade grinding on stainless steel and titanium, as well as for glass polishing. The heavy polyester cloth backing provides rugged durability and tear-resistance, and is suitable for wet or dry applications. Belts come in both YF-weight polyester and XF-weight polyester.
Superior Finish Sanding with Silicon Carbide
Silicon carbide is a very hard and sharp mineral commonly used for low-pressure applications such as paint prep and the final stages of whitewood sanding, as well as grinding applications on metal. It can also be used for glass and mirror grinding, finishing, and polishing. While it may have a shorter life than aluminum oxide, it produces a superior finish and should be used where the best possible finish is desired.
Belt Sizes for Every Application
Abrasive belts come in many different widths and lengths and are used on a variety of different belt sanding tools for many different applications on both wood and metal. At 3M we offer a broad selection of belts to fit most any industrial belt sander. Wider belts are used with wide belt sanders to dimension or finish wood panels, smooth rough cut edges of metal sheets, or add a grain pattern to stainless steel sheets. Medium-width belts fit onto edge sanders for sanding flat, narrow surfaces such as panel edges; and narrow belts are used with portable belt sanders for sanding or blending wood pieces such as cabinet doors.
- Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
- IndustryIB
- Marketplace Formal Name3M™ Cloth Belt 461F, P400 XF-weight, 3 in x 79 in, Film-lok, Single-flex (Case of 50) SKU 7010532281
- Lead Time43
- Manufacturer3M
- SAP7010532281
- 3M IDCY998600571
- UPC00051119247152
- Product Formal Name3M™ Cloth Belt 461F, P400 XF-weight, 3 in x 79 in, Film-lok, Single-flex (Case of 50) SKU 7010532281
- Case UnitCase of 50
- Unit of MeasureEach
- Product ID461F
- Estimated Lead Time43
- Grit/Micron400
- Size3 in x 79 in
- ColorBlack
- Inventory Status CodeN
- Country of OriginUSA
- Return PolicyNo Return
- Width3 in
- Length79 in
- Bullets
- Bullet 1Sharp silicon carbide mineral cuts faster than aluminum oxide and produces a consistent finish;Tough, water-resistant polyester backing supports wet or dry applications from heavy-duty grinding to fine finishing without tearing or nicking;Cloth backing provides flexibility;Heat-resistant resin coating bonds abrasive to backing for durability under pressure, heat, and water;Use on backstands for grinding and finishing applications
- Transportation
- Harmonized Tariff Schedule Number6805100000
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.