3M™ Cloth Belt 461F, P400 XF-weight, 3-1/2 in x 132 in, Sine-lok, Single-flex, 50 per case

3M™ Cloth Belt 461F is constructed of sharp silicon carbide abrasive that fractures easily and consistently produces an excellent finish for the duration of the belt life. This resin-bonded cloth belt gives you flexibility, durability, and consistent performance for grinding, blending, deburring, and finishing on all metals.
Price: $1211.71

(Case of 50 Each)

Estimated Lead Time is 7 working days.
  • $1211.71
  • Case of 50 - $1211.71
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      22.302 lbs
    • SKU
      7010414995
    • UPC/ISBN
      00051119145816
  • Industry
    IB
  • Lead Time
    7
  • Manufacturer
    3M
  • SAP
    7010414995
  • 3M ID
    60410014512
  • UPC
    00-51119-14581-6
  • Product Formal Name
    3M™ Cloth Belt 461F, P400 XF-weight, 3-1/2 in x 132 in, Sine-lok, Single-flex, 50 per case
  • Case Unit
    Case of 50
  • Unit of Measure
    Each
  • Product ID
    461F
  • Estimated Lead Time
    7
  • Grit/Micron
    400
  • Size
    3-1/2 in x 132 in
  • Inventory Status Code
    N
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xM8tSO82Zmv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Width
    3-1/2 in
  • Length
    132 in
  • Box Length (in)
    14.1
  • Box Width (in)
    14
  • Box Height (in)
    9.2
  • Bullets
    • Bullet 1
      - sharp silicon carbide mineral cuts faster than aluminum oxide and produces a consistent Finish
      - tough, water-resistant polyester backing supports wet or dry applications from Heavy-duty grinding to fine finishing without tearing or nicking
      - cloth backing Provides flexibility
      - heat-resistant Resin coating bonds Abrasive to backing for durability under pressure, heat, and water
      - Use on backstands for grinding and finishing applications
  • Transportation
    • ECCN Number
      EAR99
    • UNSPSC Code
      31191504
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      001060
    • NMFC Class
      070.0
    • NMFC Sub
      09
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7010414995
  • UPC/ISBN
    00051119145816

Tough Durability for Coarse Grinding3M™ Cloth Belt 461F is frequently used for coarse grade grinding on stainless steel and titanium, as well as for glass polishing. The heavy polyester cloth backing provides rugged durability and tear-resistance, and is suitable for wet or dry applications. Belts come in both YF-weight polyester and XF-weight polyester.Superior Finish Sanding with Silicon CarbideSilicon carbide is a very hard and sharp mineral commonly used for low-pressure applications such as paint prep and the final stages of whitewood sanding, as well as grinding applications on metal. It can also be used for glass and mirror grinding, finishing, and polishing. While it may have a shorter life than aluminum oxide, it produces a superior finish and should be used where the best possible finish is desired.Belt Sizes for Every ApplicationAbrasive belts come in many different widths and lengths and are used on a variety of different belt sanding tools for many different applications on both wood and metal. At 3M we offer a broad selection of belts to fit most any industrial belt sander. Wider belts are used with wide belt sanders to dimension or finish wood panels, smooth rough cut edges of metal sheets, or add a grain pattern to stainless steel sheets. Medium-width belts fit onto edge sanders for sanding flat, narrow surfaces such as panel edges; and narrow belts are used with portable belt sanders for sanding or blending wood pieces such as cabinet doors.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.