3M™ Cloth Belt 341D, 60 X-weight, 4 in x 36 in, Fabri-lok, Single-flex, 50 per case

3M™ Cloth Belt 341D is a durable aluminum oxide cloth belt recommended for your metal deburring, general metalworking, and some woodworking applications. It is suitable for wide belt, edge, or portable belt sanding, and can be used for a variety of applications on metal substrates and wood.

Price: $270.52

(Case of 50 Each)

  • $270.52
  • Case of 50 - $270.52
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      14.8 lbs
    • SKU
      7010360696
    • UPC/ISBN
      00051115666278
  • Industry
    IB
  • Lead Time
    2
  • Manufacturer
    3M
  • SAP
    7010360696
  • 3M ID
    60440201519
  • UPC
    00-51115-66627-8
  • Product Formal Name
    3M™ Cloth Belt 341D, 60 X-weight, 4 in x 36 in, Fabri-lok, Single-flex, 50 per case
  • Brand-old
    3M
  • Case Unit
    Case of 50
  • Unit of Measure
    Each
  • Inner Unit
    Inner of 10
  • Product ID
    341D
  • Estimated Lead Time
    2
  • Grade
    60
  • Grit/Micron
    60
  • Size
    4 in x 36 in
  • Size Metric
    36 Inch x 914.4 mm
  • Color-old
    Brown
  • Inventory Status Code
    S
  • Position
    Good
  • Instructions/Manual
    https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSuUn_zu8l00xM8_enx_1Mv70k17zHvu9lxtD7SSSSSS--
  • Country of Origin
    USA
  • Product Form
    Belt
  • Industries
    Marine
  • Applications
    Deburring
  • Sub Applications
    Blending
  • Sub Industries
    Builders Hardware
  • Backing Material
    Cloth
  • For Use On
    Aluminum
  • Equipment - Machines
    Bench Top Motors
  • Mineral Type
    Aluminum Oxide
  • Backing Weight
    X Weight
  • Back Color
    Brown
  • Return Policy
    No Return
  • Width
    4 in
  • Length
    36 in
  • Box Length (in)
    20.9
  • Box Width (in)
    16.9
  • Box Height (in)
    7.4
  • Bullets
    • Bullet 1
      - tube-shaped Band fits inner and outer contours to remove parting lines, imperfections, and burrs
      - X-weight cloth backing withstands Heavy sanding and grinding
      - Resin bond withstands High heat and pressure
      - tough aluminum oxide Abrasive mineral cuts fast and performs well on many substrates
      - bands fit onto a Rubber expander wheel attachment (sold separately) for Use with a die grinder or rotary drill
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      6805100000
    • UNSPSC Code
      31191507
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      001100
    • NMFC Class
      055.0
    • NMFC Sub
      00
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7010360696
  • UPC/ISBN
    00051115666278

3M™ Cloth Belt 341D comes with fast-cutting aluminum oxide abrasive grains resin-bonded to a durable X-weight cotton cloth backing to provide you with continuous cut and long-life performance necessary for more aggressive dry sanding applications. For finishing on metal, the closed coat construction offers a consistent, fine finish, and is suitable for producing a grain pattern. This belt should not be run wet.Aluminum oxide mineral is a popular choice among industrial professionals because of its cut-rate, durability, and long life. It can be used on a wide variety of materials in both woodworking and metalworking, including ferrous alloys, and is the most commonly used industrial abrasive. The abrasive particles are adhered to the cloth backing with resin, creating a strong bond that withstands high heat and pressure.Abrasive belts come in many different widths and lengths and are used on a variety of different belt sanding tools for many different applications on both wood and metal. At 3M we offer a broad selection of belts to fit most any industrial belt sander. Wider belts are used with wide belt sanders to dimension or finish wood panels, smooth rough cut edges of metal sheets, or add a grain pattern to stainless steel sheets. Medium-width belts fit onto edge sanders for sanding flat, narrow surfaces such as panel edges; and narrow belts are used with portable belt sanders for sanding or blending wood pieces such as cabinet doors.Belts come with various splices that join the belt ends. A film media splice achieves a secure bond with a joining film that minimizes chatter marks, ensures a smooth running belt, and produces consistent finishing results. A sine wave splice is constructed of interlocking fingers that enable the splice to travel smoothly over contact wheels, reduce hinging, and provide added strength to the joint area. Sine wave splices are typically used for coarser grades and wide belts.

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.