3M™ Betafine™ PEG Series Filter Cartridge PEG020B01FA, 10 in, 0.2UM ABS, 222/Flat Cap, Silicone, 6 Per Case

3M™ Betafine™ PEG Series Filter Cartridge PEG020B01FA, 10 in, 0.2UM ABS, 222/Flat Cap, Silicone, 6 Per Case

Today's electronics manufacturing and chemicals processing demand ever increasing levels of filtration efficiency and filtrate purity. Our Betafine™ PEG Series Filter Cartridge provides solutions for a variety of applications. This absolute-rated, graded-porosity 100% polypropylene pleated filter features our Advanced Pleat Technology (APT) that increases usable surface area and service life.
Price: $1738.46

(Case of 6 Each)

Estimated Lead Time is 160 working days.
  • $1738.46
  • Case of 6 - $1738.46
Qty:  
  • Return Policy

    Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product. 

    • Weight
      7.703 lbs
    • SKU
      7010410989
    • UPC/ISBN
      00016145096105
  • Industry
    HC
  • Lead Time
    160
  • Manufacturer
    3M
  • SAP
    7010410989
  • 3M ID
    70020073139
  • UPC
    00-16145-09610-5
  • Product Formal Name
    3M™ Betafine™ PEG Series Filter Cartridge PEG020B01FA, 10 in, 0.2UM ABS, 222/Flat Cap, Silicone, 6 Per Case
  • Brand
    Betafine
  • Case Unit
    Case of 6
  • Unit of Measure
    Each
  • Estimated Lead Time
    160
  • Inventory Status Code
    N
  • Technical Information
    https://multimedia.3m.com/mws/media/862399J/3m-betafine-peg-series-filter-cartridges.jpg
  • Country of Origin
    USA
  • Return Policy
    No Return
  • Box Length (in)
    8.250
  • Box Width (in)
    11.375
  • Box Height (in)
    14.375
  • Bullets
    • Bullet 1
      - advanced Pleat technology construction Provides High surface area and Higher Product throughputs for prolonged service life
      - Absolute-Rated filter performance for Higher Product quality and yields
      - graded-porosity multi-layer filter media for Higher contaminant holding capacity
      - polypropylene cartridge components are free of adhesives & surfactants
      - broad chemical compatibility for most aggressive process applications
  • Transportation
    • ECCN Number
      EAR99
    • Harmonized Tariff Schedule Number
      8421290065
    • UNSPSC Code
      47101500
    • United States Department Of Transportation Ground US DOT, 49 CFR
      NOT REGULATED
    • United States Department Of Transportation Vessel US DOT, 49 CFR
      NOT REGULATED
    • NMFC Item
      069095
    • NMFC Class
      100.0
    • NMFC Sub
      03
    • Transport Protective Service
      PROTECTIVE SERVICE NOT REQUIRED
    • International Air Transport Association
      NOT REGULATED
    • International Maritime Organization
      NOT REGULATED
    • Flashpoint Transport
      No Flash Point
  • SKU
    7010410989
  • UPC/ISBN
    00016145096105

Betafine PEG series filter cartridges effectively reduce the contaminating particles while maintaining or increasing process yields. These filter cartridges represent a major advance in pleated filter technology and performance that is built upon our history of filter design innovation. This absolute-rated, graded-porosity 100% polypropylene pleated cartridge features our highly effective Advanced Pleat Technology (APT) design that increases the usable filtration surface area while maintaining standard cartridge sizes. The result is a filter cartridge that has consistent performance and long service life.ABCs of the APT DesignWe developed our innovative Advanced Pleat Technology (APT) design to increase the service life of every Betafine™ PEG series filter cartridge. This design technology maximizes the useful surface area while maintaining open flow paths between media pleats. The design also supports a graded-porosity media structure, which results in lower pressure drops, longer service life and lower overall filtration costs. These filters are manufactured using our staggered pleat configuration that, when combined with a novel support material, provides more open space between the pleats. The increased open area of the staggered pleats allow for greater contaminant loading between each pleat at the inside diameter, while reduced-length pleats take advantage of existing open space closer to the outside diameter. The result is a fully usable surface area that provides superior service life.ApplicationsElectronics ManufacturingPre-reverse osmosis water filtrationPlating and cleaning bathsComplex multi-layer board processesFine Chemical ProductionClarification of high purity chemicalsOrganic and inorganic chemical intermediatesVarious acids and basesSolvents and polymer solutionsGraded-Porosity — the Key to Longer LifeThe Betafine™ PEG series filter cartridge ,s graded-porosity media structure reduces particles sequentially by size — the larger particles by the more open, outer medium and the smaller particles by the tighter, inner medium. The outer medium acts as a pre-filter, while the inner provides the absolute removal specified by the cartridge rating. Our unique construction effectively spreads the contaminant through the depth of the filter media resulting in high contaminant capacity with lower pressure drop for longer service life as compared to competitive filters.Chemical CompatibilityFine chemical production demands economical, rigorous filter cartridges with long service life. Our durable polypropylene construction provides broad chemical and mechanical compatibility for many demanding process fluid applications. Compatibility is influenced by process operating conditions; in critical applications, cartridges should be tested under actual conditions to determine the correct selection.We specifically designed, manufactured, and quality engineered Betafine™ PEG Series Filter Cartridges to meet the requirements of the electronics and fine chemical processing industry. The higher surface area of our exclusive APT design, our multi-layer, graded porosity media structure and broad chemical compatibility deliver the effective filtration you need while lowering your operational filtration costs

FREIGHT FREE on purchases with a subtotal of $4000.00 or more.

Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.

If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.