3M™ All Weather Flashing Tape 8067 Tan, 2 in x 75 ft, 24 rolls per case, Non-Slit Liner
3M™ All Weather Flashing Tape 8067 is a self-adhered, waterproof flashing membrane designed for sealing around openings and penetrations in exterior walls. This product has a unique acrylic pressure sensitive adhesive that aggressively sticks and stays stuck both at lower and higher application temperatures than traditional flashing tapes. It even adheres to damp surfaces.
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryIB
-
Lead Time2
-
Manufacturer3M
-
SAP7000049773
-
3M ID70006745049
-
UPC00-51111-98302-7
-
Product Formal Name3M™ All Weather Flashing Tape 8067 Tan, 2 in x 75 ft, 24 rolls per case, Slit Liner (1-1 Slit)
-
Brand-old3M
-
Case UnitCase of 24
-
Unit of MeasureRoll
-
Product ID8067
-
Estimated Lead Time2
-
Size2 in x 75 ft
-
Size Metric75 Linear Foot x 22.86 m
-
ColorTan
-
Inventory Status CodeS
-
Country of OriginUSA
-
Product FormRoll
-
IndustriesConstruction
-
ApplicationsAir Barrier
-
Backing MaterialProprietary film
-
Adhesive TypeAcrylic
-
Adhesion Strength60 oz/in
-
Return PolicyNo Return
-
Width2 in
-
Length75 ft
-
Box Length (in)12
-
Box Width (in)12
-
Box Height (in)13.1
- Bullets
-
Bullet 1- Apply at surface temperatures as low as 0°F (-18°C) or high as 176°F (80°C)
- Resists UV exposure for up to 12 months
- Passes nail sealability before and after thermal cycling according to AAMA 711-05
- Bonds to most common building materials without primers and staples
- Service temperature -40ºF to 240ºF (-40ºC to 116ºC)
- No adverse reaction with many building sealants
- Split-liner for easy and accurate positioning of tape, especially long lengths
- Eligible for LEED Compliance Credits
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number3919102055
-
UNSPSC Code31201500
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item157190
-
NMFC Class060.0
-
NMFC Sub00
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
-
SKU7000049773
-
UPC/ISBN00051111983027
Bonds to Most Common Building Materials without Primers and Staples3M™ All Weather Flashing Tape 8067 is engineered to increase productivity while solving the most critical flashing problems. Unique acrylic pressure sensitive adhesive sticks and stays stuck to seal around windows, doors and other openings. To prevent moisture intrusion, the thin backing construction effectively conforms and seals around nails and staples with less buildup under siding. Proprietary construction will not liquefy, bleed, or melt in contact with many building sealants or in extreme summer temperatures.Recommended ApplicationsSealing joints around sills, jambs and heads of rectangular windows in wood frame constructionSealing around other wall interruptions in non-roof areas, such as thresholds, dryer vents and hose bibsWhen installed properly as a concealed flashing in vertical walls in frame construction, it prevents moisture intrusion or water leaks and avoids the costly problems caused by water infiltrationStays Stuck, Even in Extreme Temperatures3M™ All Weather Flashing Tape 8067 resists UV exposure for up to 12 months. It can be applied to materials without primers or staples and bonds in surface temperatures from 0° to 176°F (-18° to 80°C) per AMAA 711-05. Its proprietary backing seals around nails and staples to prevent moisture intrusion. This backing is also tough, resists punctures and tears, yet it is thin to fit conveniently into corners and under siding. The split paper release liner provides fast application with easy and accurate positioning of the tape.
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.