3M™ 100 Series Bag Filter BAG-128A, 70-0202-3744-5, 34UM, 7 in x 32 in, 10 Per Case
We construct 3M™ 100 Series High Performance Liquid Filter Bags using polypropylene microfibers that allow very fine particle capture at high efficiencies. With over 90% particle removal efficiency at their suggested application rating, our Series 100 filter bags offer an excellent balance of high efficiency with very low initial pressure drop and an effective alternative to filter cartridges.
-
Return Policy
Our site states no returns allowed; however, in addition to a few exceptions, if your order is defective or damaged, the order will be replaced with good product.
-
IndustryHC
-
Lead Time2
-
Manufacturer3M
-
SAP7000001843
-
3M ID70020237445
-
UPC00-16145-21513-6
-
Product Formal Name3M™ 100 Series Bag Filter BAG-128A, 70-0202-3744-5, 34UM, 7 in x 32 in, 10 Per Case
-
Case UnitThis price is for a MOQ of 2 cases of 10
-
Unit of MeasureCase
-
Estimated Lead Time2
-
Inventory Status CodeN
-
Technical Informationhttps://multimedia.3m.com/mws/media/623963O/3mtm-100-series-high-performance-liquid-filter-bags-spec-sheet.pdf&fn=3M 100 Series High Performance Liquid Filter Bags Spec Sheet_R2.pdf
-
Country of OriginMexico
-
Return PolicyNo Return
-
Box Length (in)20.000
-
Box Width (in)12.000
-
Box Height (in)8.500
- Bullets
-
Bullet 1- 3M™100 Series Liquid Filter Bags have a high contaminant holding capacity
- 90% particle removal efficiency at suggested application ratings
- 3M 100 Series Liquid Filter Bags can adsorb unwanted trace oils that frequently occur in processed fluids
- Manufacturing processes do not include the use of silicone or adhesives
- These filters are constructed of FDA CFR-21 Listed Materials
-
- Transportation
-
ECCN NumberEAR99
-
Harmonized Tariff Schedule Number5911900080
-
UNSPSC Code40161500
-
United States Department Of Transportation Ground US DOT, 49 CFRNOT REGULATED
-
United States Department Of Transportation Vessel US DOT, 49 CFRNOT REGULATED
-
NMFC Item069100
-
NMFC Class250.0
-
NMFC Sub03
-
Transport Protective ServicePROTECTIVE SERVICE NOT REQUIRED
-
International Air Transport AssociationNOT REGULATED
-
International Maritime OrganizationNOT REGULATED
-
Flashpoint TransportNo Flash Point
-
-
SKU7000001843
-
UPC/ISBN00016145215131
Our 3M filters are constructed of FDA CFR-21 Listed Materials 100 Series Liquid Filter Bags can also adsorb unwanted trace oils that frequently occur in processed fluids. The high amount of surface area, due to the polypropylene microfiber construction, results in oil holding capacities of 10 or more times the filter's own weight. 3M 100 series bags are offered in Size #1 and #2 configurations, in grades from 1.5 to 34 microns at initial efficiency.Filter MediaPolypropylene microfiber filter media provides high particle removal efficiency for high quality filtration with broad chemical compatibility. We use no silicone in the materials of construction, nor in the manufacture of these products. Plastic or Metal Ring SealProper sealing of the bag in the filter housing is necessary for prevention of fluid bypass and subsequent contamination of the downstream fluid. 3M 100 Series Liquid Filter Bags are offered in both polypropylene and metal ring sealing collar versions that will properly seal onto most filter bag manufacturers' housings. We offer a plastic collar model in which the filter bag media is welded to a specially-designed plastic collar for proper sealing of the 3M 100 Sries Liquid Filter Bags in most conventional bag housings. The plastic collar incorporates an ergonomically designed handle, which allows easy removal of the filter bag from the filter housing, and for the insertion of bag accessories (displacement balloons, magnets, etc.). For ease of identification and traceability, the handle is engraved with micron grade and manufacturing lot information. Ring collar versions use a stainless steel ring for sealing most versions of the 3M 100 Series Liquid Filter Bags into the housing. These versions are appropriate for use in most filter bag housings that will not accept the plastic collar version.ApplicationsAcids and basesMachine coolantsAminesMakeup waterCarbon bedsOrganic solventsCompletion fluidsPhoto chemicalsDeep wellsPlating solutionsDesalinationRO membranesDI resinsStorm WaterGlycolWastewaterGroundwater clean-upWaterflood
Our site states no returns allowed; however, if your order is defective or damaged, the order will be replaced with good product. In addition, we will attempt to return all your product (not only damaged product) if 3M grants the return based on various factors. Some items may be approved for return pending approval from 3M. Some but not all factors include if the item is a 3M stock item and elapsed time from receipt of product to issued return request. Note: 3M will not accept a return if the item is made to order or if the order is less than $600.00. Please double check accuracy of your orders prior to placing them. Details regarding if an item is stock or made to order can be found in the specifications tab of the item page. N = Made to order Item. S = Stock Item. We cannot guarantee any returns.
If you received a defective or damaged shipment, please email us at support@industrialgeneralstore.com explaining in detail the reason for requesting a replacement so we can contact 3M and initiate the return and new shipment.