3M Marine Products

CLICK ON ANY CATEGORY ITEM BELOW FOR A SEARCH

Compound for Mold and Tooling - aggressively removes sanding scratches in tooling gelcoat (P600 or finer discs with soft interface, 1000 or finer 3M™ Wetordry™ sheets), reducing sanding and compounding time while saving time

 

Compounds - Marine Rubbing Compound buffs to a high gloss with minimum of swirl marks. Can be used by hand or machine.

 

Fillers - high strength - high performance reinforced formula designed with 3M Scotchlite Glass Bubbles. Designed for repair areas of fiberglass hulls, decks, and other marine parts

 

Fillers - Premium Marine

 

Glass Bubbles - a low-density polyolefin resin formulation that reduces the weight of plastic parts by up to twenty percent. Glass Bubbles have various densities and various isostatic crush strength up to 4000 psi. The S Series glass bubbles have smaller particle sizes than the K Series

 

Marine Boat Soap

 

Marine Removers - mildew stain, black streaks

 

Marine Restorers - Fiberglass, color, gloss

 

Marine Sealant - Adhesive, fast cure, silicone, OEM Adhesive Glass Sealer

 

Marine Vinyl Cleaners - vinyl, non-skid

 

Marine Wax - liquid, Scotchgard

 

Spray Grease Lube - Clear, flowable, high-performance, general purpose grease that sprays out as a liquid and then sets up to a uniform coating of grease in a few minutes

 

Spray Silicone Lubricant - A high solids, high viscosity aerosol lubricant designed for lubricating moving parts, eliminating squeaks caused by friction; protecting against rust and corrosion; sealing out moisture; preserving plastics, rubber, leather

 

Ultrapro High Temp Silicones - silicone compound for form-in-place gasketing. Designed for automotive use, it is suitable for applications that reach temperatures up to 600 F. Oxygen sensor safe