|
|
PRODUCTS FOUND
|
Click to Enlarge
UPC CODE
0-51144-05960-7
|
3M™ Acryl-Green Spot Putty, 05960, 21.0 oz Tube, 12 per case UPC = 0-51144-05960-7 3M ID = 60980005882 Product ID = 05960 |
|
Fast drying, easy sanding putty designed for spotty repairs. Spreads very easily. Loads paper less and can be sanded in 10 to 15 minutes.
21.0 oz Tube
 |
 |
|
|
|
Click to Enlarge
UPC CODE
0-51131-05962-7
|
3M™ Acryl-Marine Putty, 05962, White, 21 oz Tube, 12 per case UPC = 0-51131-05962-7 3M ID = 60980009249 Product ID = 05962 |
|
Designed specifically for the boat repair market, this putty is recommended for filling pinholes, scratches and other surface defects on hulls.
21 oz Tube
|
|
|
|
|
Click to Enlarge
UPC CODE
0-51131-05830-9
|
3M™ Creme Hardener, 05830, Red, 2.75 oz Tube, 12 per case UPC = 0-51131-05830-9 3M ID = 60980022754 Product ID = 05830 |
|
Red creme hardening agent designed to be used with all 3M™ Body Repair Fillers, Fiberglass Reinforced Fillers, and Finishing Putties. Creamy consistency mixes easily and quickly.
2.75 oz Tube
|
|
|
|
|
Click to Enlarge
UPC CODE
0-51131-05860-6
|
3M™ Dry Guide Coat Cartridge, 05860, 50 gr, 10 per case UPC = 0-51131-05860-6 3M ID = 60980026391 Product ID = 05860 |
|
A method for identifying surface imperfections such as pinholes and deep scratches in primer. Requires no masking and there is no dry time involved. Can be used for both wet and dry sanding. Contains no solvents.
Used in the dry primer sanding process. When sanding polyester filler, it ensures the filler is flat (no ripples) and that the body styling lines and contours are straight and correct. It also ensures the total primed area is sanded prior to top coating.
50 gr
|
|
|
|
|
Click to Enlarge
UPC CODE
0-51131-05861-3
|
3M™ Dry Guide Coat, 05861, 50 gr Cartridge and Applicator Kit, 6 per case UPC = 0-51131-05861-3 3M ID = 60980026409 Product ID = 05861 |
|
A method for identifying surface imperfections such as pinholes and deep scratches in primer. Requires no masking and there is no dry time involved. Can be used for both wet and dry sanding. Contains no solvents. Kit contains an applicator pad.
Used in the 3M™ Dry Primer Sanding System. When sanding polyester filler, it ensures the filler is flat (no ripples) and that the body styling lines and contours are straight and correct. It also ensures the total primed area is sanded prior to top coatin
50 gr
|
|
|
|
|
Click to Enlarge
UPC CODE
0-51131-05838-5
|
3M™ Fiberglass Cloth, 05838, 8 sq ft, 6 per case UPC = 0-51131-05838-5 3M ID = 60980022804 Product ID = 05838 |
|
3M™ Fiberglass Cloth is designed to be used with 3M™ Resin, part numbers 05833 or 05834, or 3M™ Short Strand Fiberglass Reinforced Fillers, part numbers 05815 or 05816, to patch larger holes in metal damage to fiberglass panels.
For reinforcing fiberglass and metal repairs. Excellent for large repairs where extra reinforcement is needed.
8 sq ft
|
|
|
|
|
Click to Enlarge
UPC CODE
0-51131-05837-8
|
3M™ Fiberglass Mat, 05837, 8 sq ft, 6 per case UPC = 0-51131-05837-8 3M ID = 60980022796 Product ID = 05837 |
|
3M™ Fiberglass Mat is designed to be used with 3M™ Resin, part numbers 05833 or 05834, or 3M™ Short Strand Fiberglass Reinforced Fillers, part numbers 05815 or 05816, to patch larger holes in metal damage to fiberglass panels.
For reinforcing fiberglass and metal repairs. Excellent for large repairs where extra reinforcement is needed.
8 sq ft
|
|
|
|
|
Click to Enlarge
UPC CODE
0-51131-05833-0
|
3M™ Fiberglass Resin, 05833, 1 Quart (US), 12 per case UPC = 0-51131-05833-0 3M ID = 60980022762 Product ID = 05833 |
|
Designed to be used with 3M™ Fiberglass Cloth (PN 05838) and/or 3M™ Fiberglass Mat(PN 05833) to patch holes in metal, and cracks, tears, punctures and splits in fiberglass panels.
Waterproof when cured. 3M™ Liquid Hardner, part number 05836, included. Thick formulation resists sags and runs.
1 Quart (US)
|
|
|
|
|
Click to Enlarge
UPC CODE
0-51131-05834-7
|
3M™ Fiberglass Resin, 05834, 1 Gallon (US), 4 per case UPC = 0-51131-05834-7 3M ID = 60980022770 Product ID = 05834 |
|
3M™ Fiberglass Resin is designed to be used with 3M™ Fiberglass Cloth (PN 05838) and/or 3M™ Fiberglass Mat (PN 05833) to patch holes in metal, and cracks, tears, punctures and splits in fiberglass panels.
Waterproof when cured. 3M™ Liquid Hardner, part number 05836, included. Thick formulation resists sags and runs.
1 Gallon (US)
|
|
|
|
|
Click to Enlarge
UPC CODE
0-51131-05824-8
|
3M™ Flowable Finishing Putty, 05824, 24.0 oz Squeeze Tube, 6 per case UPC = 0-51131-05824-8 3M ID = 60980035442 Product ID = 05824 |
|
Two-component, stain-free, tack-free, self-leveling repair putty. Designed for use as a skin coat over plastic filler to fill pinholes, sand scratches, low areas or other imperfections.
Works well on galvanized, aluminum and throughly cured and sanded factory-applied paint surfaces. Minimizes staining that can occur with basecoat/clearcoat systems over body filler. This flowable, brushable product cures tack-free in 30 minutes. Use wi
24.0 oz Squeeze Tube
|
|
|
|
|
Click to Enlarge
UPC CODE
0-51131-05800-2
|
3M™ Lightweight Body Filler, 05800, 1 Quart (US), 6 per case UPC = 0-51131-05800-2 3M ID = 60980105591 Product ID = 05800 |
|
Lighweight polyester body filler which cures to a tack-free state in 15 to 20 minutes. This filler has a creamy texture, spreads smoothly, easy to sand and is vacuum processed to minimize pinholing.
1 Quart (US)
|
|
|
|
|
Click to Enlarge
UPC CODE
0-51131-05801-9
|
3M™ Lightweight Body Filler, 05801, 1 Gallon (US), 4 per case UPC = 0-51131-05801-9 3M ID = 60980105583 Product ID = 05801 |
|
Lighweight polyester body filler which cures to a tack-free state in 15 to 20 minutes. This filler has a creamy texture, spreads smoothly, easy to sand and is vacuum processed to minimize pinholing.
1 Gallon (US)
|
|
|
|
|
|
|
|
